L14-8 是一种强效的铁死亡 (ferroptosis) 诱导剂,通过泛素化作用促进 PLK1 降解、增加 TP53 磷酸化和 SAT1 转录,从而引发铁死亡和癌细胞死亡,可用于晚期前列腺癌研究。
L14-8
产品编号: MS-N63975 分子式: C30H25F2NO5 分子量: 517.52
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

L14-8 是一种强效的铁死亡 (ferroptosis) 诱导剂,通过泛素化作用促进 PLK1 降解、增加 TP53 磷酸化和 SAT1 转录,从而引发铁死亡和癌细胞死亡,可用于晚期前列腺癌研究。

生物实验数据

生物活性 L14-8 is a potent ferroptosis inducer that promotes PLK1 degradation via ubiquitination and increases TP53 phosphorylation and SAT1 transcription, thereby triggering ferroptosis and cancer cell death, and can be used for the study of advanced prostate cancer.
体外研究
(In Vitro)

L14-8 (5-25 μM, 48 h) 在 C4-2B 和 22Rv1 细胞中均导致超过 80% 的细胞死亡,而在 25 μM 下对正常前列腺细胞的生长没有显著影响。
L14-8 (10 μM, 24-48 h) 通过转录激活 SAT1 表达,升高 MDA 水平的方式在 C4-2B 和 22Rv1 细胞中引发铁死亡。
L14-8 (0-10 μM, 0-24 h) 在 C4-2B 和 22Rv1 细胞中通过结合 PLK1 并增强 PLK1 介导的 TP53 磷酸化和表达,从而激活 SAT1 转录。

Cell Viability Assay

Cell Line: C4-2B and 22Rv1 cells
Concentration: 5 and 7.5 μM
Incubation Time: 72 h
Result: Significantly rescued the inhibitory effect of L14-8 on the viability of C4-2B and 22Rv1 cells.
Significantly reduced the sensitivity of the cells after knocking out TP53.

RT-PCR

Cell Line: C4-2B and 22Rv1 cells
Concentration: 10 μM
Incubation Time: 48 h
Result: Dramatically increased the the expression of ferroptosis-related genes SAT1.

Western Blot Analysis

Cell Line: C4-2B and 22Rv1 cells
Concentration: 0, 1, 2, 4, 8, 12 and 24 h
Incubation Time: 72 h
Result: Significantly increased the thermal stability of endogenous PLK1.
Led to an increase in the protein levels of TP53 and phosphorylated TP53 (p-TP53).
Significantly shortened the half-life of PLK1.
体内研究
(In Vivo)

L14-8 (10-20 mg/kg, i.p., 1 天 1 次,共 25 天) 在 C4-2B 肿瘤移植小鼠模型中,能够抑制前列腺肿瘤生长,且无明显毒性作用。

Animal Model: C4-2B cells xenografted model established in male 4-week-old BALB/c nude mice
Dosage: 10 and 20 mg/kg
Administration: Intraperitoneal injection (i.p.), once daily for 25 days
Result: Significantly suppressed tumor growth in a dose-dependent manner.
Decreased cancer proliferation.
Had no changes in major organs such as the heart, kidney, liver, lung, and spleen with high doses.
Had similar liver and kidney function indices between vehicle treatment in lower doses.

化学信息

分子量 517.52
分子式 C30H25F2NO5

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础