PROTAC ERRα ligand 1

PROTAC ERRα ligand 1 是一种 PROTAC 靶蛋白配体,也是一种口服有效的 ERRα 反向激动剂(IC50 值为 0.6 μM),对包括 ERαc、ERRγ、ERβ、PPARα、PPARγ、PPARδ 和 RXRα 在内的其他核受体无显著活性,在体内可增强胰岛素敏感性,并可用于代谢疾病(如 2 型糖尿病和肥胖症)的研究。
产品编号: MS-N56516 纯度: 98.61% CAS No.: 1264754-13-3 分子式: C19H11F3N2O4S 分子量: 420.36
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价

产品描述

PROTAC ERRα ligand 1 是一种 PROTAC 靶蛋白配体,也是一种口服有效的 ERRα 反向激动剂(IC50 值为 0.6 μM),对包括 ERαc、ERRγ、ERβ、PPARα、PPARγ、PPARδ 和 RXRα 在内的其他核受体无显著活性,在体内可增强胰岛素敏感性,并可用于代谢疾病(如 2 型糖尿病和肥胖症)的研究。

生物实验数据

生物活性 PROTAC ERRα ligand 1 is a ligand for target protein for PROTAC and an orally active ERRα inverse agonist with an IC50 value of 0.6 μM that shows no significant activity against other nuclear receptors including ERαc, ERRγ, ERβ, PPARα, PPARγ, PPARδ, and RXRα, enhances insulin sensitivity in vivo, and can be used for the study of metabolic diseases such as type 2 diabetes and obesity.
IC50 & Target ERRγ:2.8 μM, ERRα:0.04 μM
体外研究
(In Vitro)

PROTAC ERRα ligand 1 (compound 29) (24 小时) 在 HEK293 细胞的双杂交报告基因检测中抑制 ERRα,IC50 为 0.6 μM。
PROTAC ERRα ligand 1 表现出明显的脱靶效应,对 CYP3A4、CYP2D6 和 51 种受体和离子通道均无显著抑制。
PROTAC ERRα ligand 1(15 μM,24 小时) 在 HEK293 细胞中对 PPARα、PPARγ、PPARδ 和 RXRα 无功能活性。
PROTAC ERRα ligand 1 (4-18 小时) 在抑制共激活肽与 ERRγ 结合方面效力较低 (选择性 >50 倍),并且在高达 10 μM 的测试浓度下不与 PPARγ 配体竞争结合。
PROTAC ERRα ligand 1 (15 μM,0-6 天) 在报告基因和 MCF-7 细胞增殖试验中未显示出功能性雌激素或抗雌激素活性。

体内研究
(In Vivo)

PROTAC ERRα ligand 1 (3、10 和 30 mg/kg,口服给药,一日两次持续 5 天,或一日一次持续 15 天) 可在饮食诱导肥胖 (DIO) 小鼠模型中恢复血清甘油三酯和胰岛素至正常水平,并改善葡萄糖耐量。
PROTAC ERRα ligand 1 (0.08-10 mg/kg,口服给药,一日一次,持续 12 或 25 天) 能显著增强 ZDF 大鼠模型中的胰岛素敏感性,使葡萄糖水平恢复正常。

Animal Model: Male AKR/J mice (8 weeks old) maintained on a high-fat diet for 5 weeks
Dosage: 3 and 30 mg/kg
Administration: p.o., b.i.d. for 5 days
Result: Exhibited significant weight loss (5%) and reductions in food intake (23%) at the higher dose compared with vehicle-treated controls.
Reduced body weight with a selective decrease in body fat without a change in lean mass.
Reduced circulating insulin levels by 67% without concomitant changes in fed glucose levels at 30 mg/kg, indicating an improvement of peripheral insulin sensitivity.
Reduced triglyceride levels by ∼50%.
Exhibited trends toward lower FFA and higher ketone (3-hydroxybutyrate) levels at the higher dose.
Showed no apparent toxicities or adverse effects at either dose.
Animal Model: Male C57BL/6 mice (8 weeks old) maintained on a high-fat diet for 11 weeks
Dosage: 10 and 30 mg/kg
Administration: p.o., q.d. for 15 days
Result: Equally effective reducing circulating insulin (~46%), free fatty acid (~40%), and triglyceride (~19%) levels at both doses, compared to vehicle-treated animals on day 10.
Showed no changes in food intake, body weight, body composition.
Showed no apparent toxicities.
Revealed improved glucose handling in an OGTT test performed on day 14.
Increased liver weight (26% at 30 mg/kg) and elevated liver triglyceride levels (2-fold and 3-fold at 10 and 30 mg/kg, respectively) in a dose-dependent manner, but without changes in AST/ALT levels or other clinical chemistries.
Animal Model: Male ZDF fa/fa rat (7 weeks old) maintained on a Purina 5008 diet
Dosage: 10 mg/kg
Administration: p.o., q.d. for 12 days
Result: Showed a marked decrease of plasma glucose levels in the insulin tolerance test (ITT) test, resulting in near normalization, indicating enhanced insulin sensitivity, with an effect comparable to Rosiglitazone (MS-H37828).
Animal Model: Male ZDF fa/fa rat (7 weeks old) maintained on a Purina 5008 diet
Dosage: 0.08, 0.4, 2, and 10 mg/kg
Administration: p.o., q.d. for 25 days
Result: Showed a dose-dependent reduction of fed glucose, triglycerides, and FFAs on day 14, reaching significance at 10 mg/kg.
Revealed a dose-dependent reduction in glucose excursion and significant reductions in glucose AUC values (-29% at 0.4 mg/kg, -48% at 2 mg/kg, and -52% at 10 mg/kg) in an OGTT on day 22, indicating improved glucose tolerance at all test doses.
Exhibited no changes in weight or epididymal fat pad.
Exhibited no apparent toxicities or adverse effects.
Showed dose-linear exposures on day 22, with maximal efficacy in the OGTT achieved at a dose level of 2.0 mg/kg.
性状 固体
颜色 Light yellow to green yellow

化学信息

分子量 420.36
分子式 C19H11F3N2O4S
CAS No. 1264754-13-3

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 4 mg/mL (9.52 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (237.89 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.3789 mL11.8946 mL23.7891 mL59.4728 mL
5 mM0.4758 mL2.3789 mL4.7578 mL11.8946 mL
10 mM0.2379 mL1.1895 mL2.3789 mL5.9473 mL
15 mM0.1586 mL0.7930 mL1.5859 mL3.9649 mL
20 mM0.1189 mL0.5947 mL1.1895 mL2.9736 mL
25 mM0.0952 mL0.4758 mL0.9516 mL2.3789 mL
30 mM0.0793 mL0.3965 mL0.7930 mL1.9824 mL
40 mM0.0595 mL0.2974 mL0.5947 mL1.4868 mL
50 mM0.0476 mL0.2379 mL0.4758 mL1.1895 mL
60 mM0.0396 mL0.1982 mL0.3965 mL0.9912 mL
80 mM0.0297 mL0.1487 mL0.2974 mL0.7434 mL
100 mM0.0238 mL0.1189 mL0.2379 mL0.5947 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础