Medrysone

Synonyms: 甲羟松; HMS; 6α-Methyl-11β-hydroxyprogesterone
Medrysone (HMS; 6α-Methyl-11β-hydroxyprogesterone) 是一种 STAT6 调节剂和 M2 巨噬细胞极化诱导剂,能够增强 IL-4 触发的 STAT6 活化、上调 M2 标志物的表达并促进 VEGF 和 CCL2 的分泌,还能增强 M2 样巨噬细胞向内皮细胞的促迁移活性,并通过调控巨噬细胞极化及相关修复通路显著促进大鼠机械损伤模型中的角膜损伤修复,因此可用于角膜损伤相关研究。
产品编号: MS-M84095 纯度: 99.79% CAS No.: 2668-66-8 分子式: C22H32O3 分子量: 344.49
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

产品描述

Medrysone (HMS; 6α-Methyl-11β-hydroxyprogesterone) 是一种 STAT6 调节剂和 M2 巨噬细胞极化诱导剂,能够增强 IL-4 触发的 STAT6 活化、上调 M2 标志物的表达并促进 VEGF 和 CCL2 的分泌,还能增强 M2 样巨噬细胞向内皮细胞的促迁移活性,并通过调控巨噬细胞极化及相关修复通路显著促进大鼠机械损伤模型中的角膜损伤修复,因此可用于角膜损伤相关研究。

生物实验数据

生物活性 Medrysone (HMS; 6α-Methyl-11β-hydroxyprogesterone) is a STAT6 modulator and M2 macrophage polarization inducer that enhances IL-4-triggered STAT6 activation, upregulates M2 marker expression, promotes VEGF and CCL2 secretion, and enhances the pro-migratory activity of M2-like macrophages toward endothelial cells, thereby significantly promoting corneal injury repair in a rat mechanical injury model through the regulation of macrophage polarization and related repair pathways, and is therefore applicable to research related to corneal injury.
IC50 & Target

STAT6

 

CCR2

 

体外研究
(In Vitro)

Medrysone (5 μM; 24 h) 通过 STAT6 依赖性通路促进 RAW264.7 和 BMDM 细胞的 M2 型极化,CD206 阳性细胞比例升高,与 IL-4 联合使用时效果增强;而沉默 STAT6 可消除 CD206 阳性细胞的增加。
Medrysone (5 μM; 24 h) 与 IL-4 联合作用时,可将 RAW264.7 细胞中 M2 标记基因 (Mrc1、IL10、Fizz1、Arg1、CD11b) 的 mRNA 表达水平上调,并高于单独使用的水平。
Medrysone (5 μM; 24 h) 与 IL-4 联合作用时,可显著促进 RAW264.7 细胞分泌 VEGF 和 CCL2,并升高 p-STAT6 蛋白水平。
Medrysone (5 μM; 24 h) 可增强 RAW264.7 细胞条件培养基对 C166 血管内皮细胞的促迁移活性和促伤口愈合活性,与 IL-4 联用时效果最强。
Medrysone (100 nM; 21 d) 可提高 ALP 活性,并支持人间充质干细胞 (hMSCs) 在 TCPS 上的长期贴附达 21 天,但与添加地塞米松的成骨完全培养基相比,其诱导的矿化基质沉积量显著减少。

Western Blot Analysis

Cell Line: RAW264.7 murine macrophage cells
Concentration: 5 μM
Incubation Time: 24 h
Result: Increased p-STAT6 levels relative to control when used alone.
Further enhanced p-STAT6 levels to a relative value of 1.44 (short exposure) when combined with IL-4, which is higher than the 0.75 relative value observed with IL-4 alone.

Cell Differentiation Assay

Cell Line: C166 murine vascular endothelial cells, RAW264.7 murine macrophage cells
Concentration: 5 μM
Incubation Time: 24 h (treatment of RAW264.7 cells)
Result: Increased C166 cell migration to a fold change of approximately 0.9 when using conditioned medium from Medrysone-treated RAW264.7 cells.
Increased C166 cell migration to a fold change of approximately 2.3 when using conditioned medium from RAW264.7 cells treated with both Medrysone and IL-4, which is higher than the fold change of approximately 1.8 observed with conditioned medium from IL-4-treated cells.\n
Enhanced C166 cell wound closure when using conditioned medium from Medrysone-treated RAW264.7 cells.
Induced the strongest wound closure when using conditioned medium from RAW264.7 cells treated with both Medrysone and IL-4.

Cell Differentiation Assay

Cell Line: human mesenchymal stem cells (hMSCs)
Concentration: 1 nM; 10 nM; 100 nM
Incubation Time: up to 21 days
Result: Supported cell proliferation comparable to cells grown in complete osteogenic media (OG+) over 21 days at 100 nM, with cells remaining attached to TCPS throughout the study.
Increased ALP activity slightly relative to OG+ at 14 days, and by ~25% relative to OG+ at 21 days at 100 nM.
Elevated relative CBFA1 expression slightly above day 0 levels at 14, 18, and 21 days, but lower than OG+ levels at 18 days at 100 nM.
Increased relative osteocalcin expression over time, with levels slightly elevated above day 0 but lower than OG+ at 21 days at 100 nM.
Resulted in significantly less mineralized matrix deposition relative to OG+, with only minimal Alizarin Red staining observed after 21 days at 100 nM.
体内研究
(In Vivo)

Medrysone (5 μM;局部给药;每 6 小时 1 次;持续 48 小时) 可显著促进大鼠角膜损伤修复。

Animal Model: male, 6-8 weeks old
Dosage: 5 μM
Administration: topical; every 6 hours; 48 hours
Result: Significantly reduced the percentage of fluorescein-positive corneal area at 48 hours.
Significantly upregulated mRNA expression of M2 macrophage markers Mrc1 (p < 0.01), Fizz1 (p < 0.01), Arg1 (p < 0.05), and CD11b (p < 0.05).
性状 固体
颜色 White to off-white

化学信息

分子量 344.49
分子式 C22H32O3
CAS No. 2668-66-8
别名 甲羟松; HMS; 6α-Methyl-11β-hydroxyprogesterone

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 50 mg/mL (145.14 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

Ethanol 中的溶解度 : ≥ 25 mg/mL (72.57 mM)

H2O 中的溶解度 : < 0.1 mg/mL (insoluble)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
Ethanol / DMSO1 mM2.9028 mL14.5142 mL29.0284 mL72.5710 mL
5 mM0.5806 mL2.9028 mL5.8057 mL14.5142 mL
10 mM0.2903 mL1.4514 mL2.9028 mL7.2571 mL
15 mM0.1935 mL0.9676 mL1.9352 mL4.8381 mL
20 mM0.1451 mL0.7257 mL1.4514 mL3.6286 mL
25 mM0.1161 mL0.5806 mL1.1611 mL2.9028 mL
30 mM0.0968 mL0.4838 mL0.9676 mL2.4190 mL
40 mM0.0726 mL0.3629 mL0.7257 mL1.8143 mL
50 mM0.0581 mL0.2903 mL0.5806 mL1.4514 mL
60 mM0.0484 mL0.2419 mL0.4838 mL1.2095 mL
DMSO80 mM0.0363 mL0.1814 mL0.3629 mL0.9071 mL
100 mM0.0290 mL0.1451 mL0.2903 mL0.7257 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 2 years; -20°C, 1 year。-80°C储存时,请在2年内使用, -20°C储存时,请在1年内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础