Betahistine

Synonyms: 倍他司汀; 培他啶
Betahistine 是一种具有口服活性的组胺 H1 受体 (histamine H1 receptor) 激动剂和 H3 受体 (H3 receptor) 拮抗剂,可用于类风湿性关节炎 (RA) 的研究。
产品编号: MS-M56128 纯度: 99.84% CAS No.: 5638-76-6 分子式: C8H12N2 分子量: 136.19
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
100mg
询价
3-5 天
500mg
询价
3-5 天
1g
询价
询价
5g
询价
询价

产品描述

Betahistine 是一种具有口服活性的组胺 H1 受体 (histamine H1 receptor) 激动剂和 H3 受体 (H3 receptor) 拮抗剂,可用于类风湿性关节炎 (RA) 的研究。

生物实验数据

生物活性 Betahistine is an orally active histamine H1 receptor agonist and H3 receptor antagonist that can be used for research on rheumatoid arthritis (RA).
IC50 & Target

H1 Receptor

 

H3 receptor

 

体外研究
(In Vitro)

Betahistine (0-10 μM) inhibits [125I]iodoproxyfan binding to membranes of CHO (rH3(445)R) and CHO (hH3(445)R) cells with IC50 values of 1.9 μM and 3.3 μM, respectively. Lead to Ki values of 1.4 μM and 2.5 μM, respectively.
Betahistine (0-10 μM) has a regulating function on cAMP formation in CHO (rH3(445)R), CHO (rH3(413)R), and CHO (hH3(445)R) cells. At low concentrations, betahistine behaves an apparent inverse agonist, and progressively enhances cAMP formation with EC50 values of 0.1 nM, 0.05 nM and 0.3 nM, respectively. In contrast, at concentrations higher than 10 nM, betahistine inhibits cAMP formation with an EC50 value of 0.1 μM in CHO (rH3(445)R) and full agonist activity.

体内研究
(In Vivo)

Betahistine (intraperitoneal or oral administration; 0.1-30 mg/kg; single dose) with acute administration has increased tele-methylhistamine (t-MeHA) levels with an ED50 of 0.4 mg/kg, indicating the inverse agonism. Besides, after acute oral administration, it increases t-MeHA levels with an ED50 of 2 mg/kg in male Swissmice.
Betahistine (oral adminstration; 1 and 5 mg/kg; daily for 3 weeks) attenuates the severity of arthritis and reduces the levels of pro-inflammatory cytokines in the paw tissues of CIA mice.

Animal Model: Collagen-induced arthritis (CIA) DBA/1 male mouse model
Dosage: 1 mg/kg; 5mg/kg
Administration: Oral adminstration; day 21 to day 42 after a 21-day CIA induction
Result: Ameliorated mouse CIA by decreasing joint destruction.
性状 液体(密度:0.984 g/cm3)
颜色 Light yellow to yellow

化学信息

分子量 136.19
分子式 C8H12N2
CAS No. 5638-76-6
别名 倍他司汀; 培他啶

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2.00 mg/mL (14.68 mM), Sonication is recommended.
10% DMSO+90% Saline: 10.00 mg/mL (73.42 mM), Solution.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (734.27 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM7.3427 mL36.7134 mL73.4268 mL183.5671 mL
5 mM1.4685 mL7.3427 mL14.6854 mL36.7134 mL
10 mM0.7343 mL3.6713 mL7.3427 mL18.3567 mL
15 mM0.4895 mL2.4476 mL4.8951 mL12.2378 mL
20 mM0.3671 mL1.8357 mL3.6713 mL9.1784 mL
25 mM0.2937 mL1.4685 mL2.9371 mL7.3427 mL
30 mM0.2448 mL1.2238 mL2.4476 mL6.1189 mL
40 mM0.1836 mL0.9178 mL1.8357 mL4.5892 mL
50 mM0.1469 mL0.7343 mL1.4685 mL3.6713 mL
60 mM0.1224 mL0.6119 mL1.2238 mL3.0595 mL
80 mM0.0918 mL0.4589 mL0.9178 mL2.2946 mL
100 mM0.0734 mL0.3671 mL0.7343 mL1.8357 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础