Amifampridine phosphate

Synonyms: 3,4-Diaminopyridine phosphate
Amifampridine (3,4-Diaminopyridine) phosphate 是一种口服有效且可透过细胞的电压门控钾 (Kv) 通道阻断剂 (PCB),对 BoNT/A 中毒具有明显的逆转作用,可增加神经肌肉连接 (NMJs) 的递质释放,并可用于 Lambert-Eaton 肌无力综合征 (LEMS) 的研究。
产品编号: MS-M52789 CAS No.: 446254-47-3 分子式: C5H10N3O4P 分子量: 207.12
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Amifampridine (3,4-Diaminopyridine) phosphate 是一种口服有效且可透过细胞的电压门控钾 (Kv) 通道阻断剂 (PCB),对 BoNT/A 中毒具有明显的逆转作用,可增加神经肌肉连接 (NMJs) 的递质释放,并可用于 Lambert-Eaton 肌无力综合征 (LEMS) 的研究。

生物实验数据

生物活性 Amifampridine (3,4-Diaminopyridine) phosphate is an orally active and cell-permeable voltage-gated potassium (Kv) channel blocker (PCB) that markedly reverses BoNT/A intoxication, enhances neurotransmitter release at neuromuscular junctions (NMJs), and can be used for research on Lambert-Eaton myasthenic syndrome (LEMS).
体外研究
(In Vitro)

Amifampridine phosphate (1.5 μM) significantly reduces Kv3.3 and Kv3.4 currents by about 10% in HEK293T cells, has no effect on Cav2.1 or Cav1.2 current.
Amifampridine phosphate (0-100 μM) increases the duration of the presynaptic AP (action potential) waveform at mammalian and frog NMJs in a dose-dependent manner.

体内研究
(In Vivo)

Amifampridine phosphate (Oral gavage; 10 mg/kg; once) can antagonize muscle paralysis following BoNT/A intoxication.
Amifampridine phosphate (2.5 mg/kg (IV); 10 mg/kg (PO); once) shows 1 hour plasma half-life and about 57% bioavailability (F) in mice.
Amifampridine phosphate has a short plasma half-life and can induce seizures when present at high concentrations, following penetration of the blood-brain barrier.

Animal Model: CD-1 mouse (female,25 g, 6 weeks old)
Dosage: 10 mg/kg
Administration: Oral gavage, once, after BoNT/A administration (IP)
Result: Revealed that neither LEMs alone (182 ± 43 min) nor the maximum safe orally deliverable dose of 3,4-DAP alone (225 ± 24 min) could significantly increase the time to death following toxin administration (216 ± 29 min). However, when the 10/50/40 3,4-DAP/LEM/shellac formulation was administered at 25 mg/kg the time to death was 302 ± 26 min - a 40% increase as compared to toxin alone.
Animal Model: CD-1 mouse (30-35 g, 8 weeks old)
Dosage: 2.5 mg/kg (IV); 10 mg/kg (PO)
Administration: IV, orally, once (Pharmacokinetic Analysis)
Result: Pharmacokinetic Parameters of Amifampridine in CD-1 mouse.
IV (2.5 mg/kg) PO (10 mg/kg)
t1/2 (h) 1.04 1.28
AUC0-24 (μM·h) 4.29 9.72
F (%) 100 56.7

化学信息

分子量 207.12
分子式 C5H10N3O4P
CAS No. 446254-47-3
别名 3,4-Diaminopyridine phosphate

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础