Atopaxar hydrobromide

Synonyms: E5555 hydrobromide; ER 172594-06
Atopaxar (E5555) hydrobromide 是一种高效、口服活性、选择性且可逆的凝血酶受体蛋白酶激活受体-1 (PAR-1) 拮抗剂,作为抗血小板剂可干扰血小板信号,并可用于动脉粥样硬化血栓性疾病的研究。
产品编号: MS-L72545 CAS No.: 474550-69-1 分子式: C29H39BrFN3O5 分子量: 608.54
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Atopaxar (E5555) hydrobromide 是一种高效、口服活性、选择性且可逆的凝血酶受体蛋白酶激活受体-1 (PAR-1) 拮抗剂,作为抗血小板剂可干扰血小板信号,并可用于动脉粥样硬化血栓性疾病的研究。

生物实验数据

生物活性 Atopaxar (E5555) hydrobromide is a potent, orally active, selective, and reversible antagonist of the thrombin receptor protease-activated receptor-1 (PAR-1) that acts as an antiplatelet agent by interfering with platelet signaling and can be used for research on atherothrombotic diseases.
IC50 & Target PAR1:5.1 nM
体外研究
(In Vitro)

Atopaxar hydrobromide (0.0001-10 μM; 1h) inhibits haTRAP (high-affinity thrombin receptor activating peptide) binding to PAR-1 on human platelet membranes in a concentration-dependent manner, with an IC50 of 0.019 μM.
Atopaxar hydrobromide shows potent inhibitory effects on human platelet aggregation induced by thrombin and TRAP with IC50s of 0.064 and 0.031 μM, respectively, but has no effect on platelet aggregation induced by either ADP or collagen.
Atopaxar hydrobromide shows potent and selective inhibitory effects on guinea pig platelet aggregation induced by thrombin and TRAP with IC50s of 0.13 and 0.097 μM, respectively.

体内研究
(In Vivo)

Atopaxar (30-100 mg/kg; p.o.) hydrobromide causes a dose-dependent prolongation of the time to occlusion of the femoral artery in photochemically-induced thrombosis (PIT) guinea pigs model.
Atopaxar hydrobromide does not prolong bleeding time in guinea pigs at the highest tested dosage of 1000 mg/kg.

Animal Model: Guinea pigs, PIT model
Dosage: Oral administration
Administration: 10 mg/kg, 30 mg/kg, 100 mg/kg
Result: Prolonged the time to occlusion by 1.8-fold and 2.4-fold at 30 mg/kg and 100 mg/kg, respectively, compared with controls.

化学信息

分子量 608.54
分子式 C29H39BrFN3O5
CAS No. 474550-69-1
别名 E5555 hydrobromide; ER 172594-06

储存&溶解度

溶解度信息
DMSO: 10 mM, Sonication is recommended.
储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础