| 生物活性 | Givinostat (ITF-2357) is an HDAC inhibitor that inhibits HDAC1 and HDAC3 with IC50 values of 198 nM and 157 nM, respectively, crosses the blood-brain barrier (BBB), and can be used for research on Duchenne muscular dystrophy. |
| IC50 & Target | HDAC9 (human):541 nM, HD1-A:16 nM, HDAC11 (human):292 nM, HDAC7 (human):524 nM, HD2:10 nM, HDAC3 (human):157 nM, HDAC6 (human):315 nM, HD1-B:7.5 nM, HDAC10 (human):340 nM, HDAC1 (human):198 nM |
| 体外研究 (In Vitro) |
Givinostat (ITF2357) suppresses total LPS-induced IL-1β production robustly compared with the reduction by ITF3056. At 25, 50, and 100 nM, Givinostat reduced IL-1β secretion more than 70%. Givinostat (ITF-2357) suppresses the production of IL-6 in PBMCs stimulated with TLR agonists as well as the combination of IL-12 plus IL-18. IL-6 secretion decreases to 50% at 50 nM Givinostat, but at 100 and 200 nM, there is no reduction. As shown by the CCK-8 assay, Givinostat (ITF-2357) inhibits JS-1 cell proliferation in a concentration-dependent manner. Treatment with Givinostat ≥500 nM is associated with significant inhibition of JS-1 cell proliferation (P<0.01). Also, the cell inhibition rate significantly differs between the group cotreated with Givinostat ≥250 nM plus LPS and the group without LPS treatment (same Givinostat concentration) (P<0.05). |
| 体内研究 (In Vivo) |
Givinostat (ITF2357) at 10 mg/kg is used as a positive control and, as expected, reduced serum TNFα by 60%. Strikingly, pretreatment of ITF3056 starting at 0.1 mg/kg significantly reduces the circulating TNFα by nearly 90%. To achieve a significant increase in serum IL-1β production, a higher dose of LPS is injected (10 mg/kg), and blood is collected after 4 h. Similarly, when pretreated with lower doses of Givinostat (ITF-2357) (1 or 5 mg/kg), there is a 22% reduction for 1 mg/kg and 40% for 5 mg/kg. |
| 性状 | 固体 |
| 颜色 | White to light yellow |
| 分子量 | 421.49 |
| 分子式 | C24H27N3O4 |
| CAS No. | 497833-27-9 |
| 别名 | ITF-2357 |
| 体内实验配方 | 10% DMSO+40% PEG300+5% Tween 80+45% Saline: 10 mg/mL (23.72 mM), Suspension. 10% DMSO+40% PEG300+5% Tween-80+45% Saline: 4 mg/mL (9.49 mM), Sonication is recommended. 10% DMSO+90% Saline: < 10 mg/mL (23.72 mM), Lower concentrations may be soluble, but exact solubility limit is unknown. 请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 储存方式 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 运输条件 | Room temperature in continental US; may vary elsewhere. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
溶液配制表
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DMSO 中的溶解度 : 200 mg/mL (474.51 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)
* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。
母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清
以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。
方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。