LYN-1604 是一种有效的 UNC-51 样激酶 1 (ULK1) 激活剂,EC50 值为 18.94 nM,可用于三阴性乳腺癌 (TNBC) 的研究。
产品编号: MS-L05265 纯度: 99.47% CAS No.: 2088939-99-3 分子式: C33H43Cl2N3O2 分子量: 584.62
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价

产品描述

LYN-1604 是一种有效的 UNC-51 样激酶 1 (ULK1) 激活剂,EC50 值为 18.94 nM,可用于三阴性乳腺癌 (TNBC) 的研究。

生物实验数据

生物活性 LYN-1604 is a potent UNC-51-like kinase 1 (ULK1) activator with an EC50 value of 18.94 nM, and it can be used for research on triple-negative breast cancer (TNBC).
IC50 & Target ULK1:18.94 nM(EC50)
体外研究
(In Vitro)

LYN-1604 is a potential ULK1 agonist (enzymatic activity=195.7% at 100 nM and IC50=1.66 μM against MDA-MB-231 cells).
LYN-1604 binds to wild-type ULK1 with a binding affinity in the nanomole range (KD=291.4 nM).
LYN-1604 (0.5, 1.0 and 2.0 μM) induces cell death via the ULK complex in MDA-MB-231 cells.
LYN-1604 (0.5-2 μM, 24 hours) induces remarkable up-regulation of Beclin-1 and degradation of p62, as well as transformation of LC3-I to LC3-II in MDA-MB-231 cells.
LYN-1604 induces ATG5-dependent autophagy via the ULK complex.
LYN-1604 can also increase cleavage of caspase3 and induce apoptosis.

Cell Viability Assay

Cell Line: MDA-MB-231 cells
Concentration: 0.5, 1.0 and 2.0 μM
Incubation Time:
Result: Induced cell death. Autophagy ratio was increased in a dose-dependent manner.

Western Blot Analysis

Cell Line: MDA-MB-231 cells
Concentration: 0, 0.5, 1, and 2 μM
Incubation Time: 24 hours
Result: Induced remarkable up-regulation of Beclin-1 and degradation of p62, as well as transformation of LC3-I to LC3-II.
体内研究
(In Vivo)

LYN-1604 (low dose, 25 mg/kg; median dose, 50 mg/kg; high dose, 100 mg/kg; intragastric administration once a day for 14 days) inhibits the growth of xenograft TNBC by targeting ULK1-modulated cell death.

Animal Model: 24 female nude mice (BALB/c, 6-8 weeks, 20-22 g)
Dosage: Low dose, 25 mg/kg; median dose, 50 mg/kg; high dose, 100 mg/kg
Administration: Intragastric administration; once a day for 14 days
Result: Significantly inhibited the growth of xenograft MDA-MB-231 cells. The body weights of mice were stable. By the end of the experiment, the liver and spleen weight indexes of mice were slightly increased in parts of the groups, while the kidney weight index was not affected in all dose groups.
性状 油状物
颜色 Colorless to light yellow

化学信息

分子量 584.62
分子式 C33H43Cl2N3O2
CAS No. 2088939-99-3

储存&溶解度

储存方式
Pure form -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (171.05 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.7105 mL8.5526 mL17.1051 mL42.7628 mL
5 mM0.3421 mL1.7105 mL3.4210 mL8.5526 mL
10 mM0.1711 mL0.8553 mL1.7105 mL4.2763 mL
15 mM0.1140 mL0.5702 mL1.1403 mL2.8509 mL
20 mM0.0855 mL0.4276 mL0.8553 mL2.1381 mL
25 mM0.0684 mL0.3421 mL0.6842 mL1.7105 mL
30 mM0.0570 mL0.2851 mL0.5702 mL1.4254 mL
40 mM0.0428 mL0.2138 mL0.4276 mL1.0691 mL
50 mM0.0342 mL0.1711 mL0.3421 mL0.8553 mL
60 mM0.0285 mL0.1425 mL0.2851 mL0.7127 mL
80 mM0.0214 mL0.1069 mL0.2138 mL0.5345 mL
100 mM0.0171 mL0.0855 mL0.1711 mL0.4276 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础