Antileishmanial agent-44

Antileishmanial agent-44 是一种靶向 Leishmania donovani Sir2 组蛋白去乙酰化酶的抑制剂,对无鞭毛体的 IC50 为 0.652 μM,可通过升高 ROS 水平诱发氧化应激,导致线粒体膜电位去极化与细胞色素 c 释放,引发磷脂酰丝氨酸外翻和 DNA 片段化,从而诱导类凋亡细胞死亡并阻滞细胞周期,同时上调巨噬细胞 Th1 型细胞因子与 NO 表达,重塑宿主免疫应答以清除胞内寄生虫,并可在体内抑制感染金黄仓鼠体内的寄生虫,因此可用于内脏利什曼病的研究。
Antileishmanial agent-44
产品编号: MS-K89170 分子式: C30H28N4 分子量: 444.57
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Antileishmanial agent-44 是一种靶向 Leishmania donovani Sir2 组蛋白去乙酰化酶的抑制剂,对无鞭毛体的 IC50 为 0.652 μM,可通过升高 ROS 水平诱发氧化应激,导致线粒体膜电位去极化与细胞色素 c 释放,引发磷脂酰丝氨酸外翻和 DNA 片段化,从而诱导类凋亡细胞死亡并阻滞细胞周期,同时上调巨噬细胞 Th1 型细胞因子与 NO 表达,重塑宿主免疫应答以清除胞内寄生虫,并可在体内抑制感染金黄仓鼠体内的寄生虫,因此可用于内脏利什曼病的研究。

生物实验数据

生物活性 Antileishmanial agent-44 is an inhibitor of Leishmania donovani Sir2 histone deacetylase with an IC50 of 0.652 μM against amastigotes; it induces oxidative stress by elevating ROS levels, causing mitochondrial membrane potential depolarization and cytochrome c release, triggering phosphatidylserine externalization and DNA fragmentation, and thereby inducing apoptosis-like cell death and cell cycle arrest, while upregulating macrophage Th1-type cytokines and NO expression to reshape the host immune response for clearance of intracellular parasites, and it inhibits parasites in infected golden hamsters in vivo, making it useful for the study of visceral leishmaniasis.
IC50 & Target

Leishmania

0.652 μM (IC50)

TNF-α

 

IL-10

 

体外研究
(In Vitro)

Antileishmanial agent-44 (11ad) 可强效抑制 J774A.1 巨噬细胞内的杜氏利什曼原虫无鞭毛体,其 IC50 为 0.652 μM,在 25 μM 浓度下作用 72 h 后抑制率可达 99%。
Antileishmanial agent-44 对 J774A.1 巨噬细胞表现出低细胞毒性,其 CC50 为 529.0 μM,选择性指数为 811.3。
Antileishmanial agent-44 (48 h) 可通过上调 Th1 细胞因子 TNF-α 和 IFN-γ、下调 Th2 细胞因子 IL-10,调控被 Leishmania donovani 感染的 J774A.1 巨噬细胞中的宿主免疫应答。
Antileishmanial agent-44 (10 μM; 24-48 h) 可诱导 J774A.1 巨噬细胞产生一氧化氮;在 10 μM 处理 24 h 和 48 h 后,分别有 39.1% 和 62.4% 的细胞显示出一氧化氮相关荧光。
Antileishmanial agent-44 (10 μM; 60-90 min) 可强效抑制纯化重组 Leishmania donovani Sir2 蛋白的组蛋白去乙酰化酶活性,孵育 60-90 min 后在 10 μM 浓度下的抑制率达 77.83%。
Antileishmanial agent-44 (10-50 μM; 24-72 h) 可在杜氏利什曼原虫前鞭毛体中诱导类凋亡细胞死亡;以 50 μM 处理 48 h 和 72 h 后,可观察到显著的寡核小体 DNA 片段化。
Antileishmanial agent-44 (10 μM; 24-48 h) 可破坏杜氏利什曼原虫前鞭毛体的细胞周期,在 10 μM 处理后导致细胞呈时间依赖性地在亚 G0/G1 期累积。
Antileishmanial agent-44 (10 μM; 12-48 h) 会在杜氏利什曼原虫前鞭毛体中诱导氧化应激与线粒体功能障碍,导致活性氧 (ROS) 水平升高、线粒体膜电位丧失,且在 10 μM 处理后,细胞色素 c 会以时间依赖的方式从线粒体释放至胞质溶胶。

Apoptosis Analysis

Cell Line: Leishmania donovani promastigotes
Concentration: 10 μM
Incubation Time: 24, 48 h
Result: Induced apoptosis-like cell death in Leishmania donovani promastigotes, with ~26.78% and ~29.51% apoptotic cells after 24 h and 48 h of treatment with 10 μM.

Cell Cycle Analysis

Cell Line: Leishmania donovani promastigotes
Concentration: 10 μM
Incubation Time: 24, 48 h
Result: Disrupted the cell cycle of Leishmania donovani promastigotes, causing time-dependent accumulation of cells in the sub-G0/G1 phase (6.97% at 24 h, 9.05% at 48 h).
体内研究
(In Vivo)

Antileishmanial agent-44 (11ad) (50 mg/kg;腹腔注射;每日 1 次;连续 5 天) 对感染 L. donovani 的金黄仓鼠脾脏内无鞭毛体负荷的抑制率达 88.4%。

Animal Model: Mesocricetus auratus
Dosage: 50 mg/kg
Administration: i.p.; daily; 5 consecutive days
Result: Achieved 88.4% inhibition of splenic amastigote burden 7 days post-treatment.

化学信息

分子量 444.57
分子式 C30H28N4

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础