Mitochondrial fusion promoter M1

Mitochondrial fusion promoter M1 是一种线粒体动态调节剂,可维持线粒体功能、促进细胞呼吸,并减轻心肌缺血/再灌注大鼠的心脏损伤和大脑损伤。
产品编号: MS-K75158 纯度: 99.95% CAS No.: 219315-22-7 分子式: C14H10Cl4N2O 分子量: 364.05
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价

产品描述

Mitochondrial fusion promoter M1 是一种线粒体动态调节剂,可维持线粒体功能、促进细胞呼吸,并减轻心肌缺血/再灌注大鼠的心脏损伤和大脑损伤。

生物实验数据

生物活性 Mitochondrial fusion promoter M1 is a mitochondrial dynamics regulator that maintains mitochondrial function, promotes cellular respiration, and attenuates cardiac and brain injury in rats with myocardial ischemia/reperfusion.
体外研究
(In Vitro)

Mitochondrial fusion promoter M1 (5-25 μM;24 h) 促进 Mitofusin-1 和 Mitofusin-2 敲除成纤维细胞中的线粒体延伸。
Mitochondrial fusion promoter M1 (20 μM;12 h) 将线粒体 ROS 降低至 1.0±0.44 倍,将线粒体膜电位从 0.29±0.05 倍提高至 0.5±0.07 倍,并恢复 BRIN-BD11 胰腺 β 细胞中的线粒体结构。
Mitochondrial fusion promoter M1 (20 μM;12 h) 防止因胆固醇暴露引起的胰腺 β 细胞耗氧率受损。
Mitochondrial fusion promoter M1 (20 μM;12 h) 防止富含胆固醇的胰腺 β 细胞中非线粒体呼吸和细胞外酸化率 (ECAR) 受损。
Mitochondrial fusion promoter M1 (20 μM;12 小时) 在胆固醇处理的胰腺 β 细胞中恢复葡萄糖刺激的胰岛素分泌 (GSIS)。

体内研究
(In Vivo)

Mitochondrial fusion promoter M1 (2 mg/kg;iv) 显著保护心脏 I/R 损伤大鼠免受脑损伤。

Animal Model: Male Wistar rats (250-300g) receiving cardiac ischemia/reperfusion (I/R)
Dosage: 2 mg/kg
Administration: I.v. 15 minutes before cardiac I/R injury
Result: Increased brain mitochondrial fusion.
Increased blood-brain barrier (BBB) tight junction protein, and reduced macrophage infiltration in the brain.
Reduced brain mitochondrial dysfunction and apoptosis, but it did not reduce mitochondrial oxidative stress.
Reduced the expression of Alzheimer’s disease (AD)-related proteins.
性状 固体
颜色 White to off-white

化学信息

分子量 364.05
分子式 C14H10Cl4N2O
CAS No. 219315-22-7

储存&溶解度

体内实验配方
10% DMSO+90% Saline: < 4.2 mg/mL (11.54 mM), Lower concentrations may be soluble, but exact solubility limit is unknown.
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 4.2 mg/mL (11.54 mM), Suspension.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 38.89 mg/mL (106.83 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.7469 mL13.7344 mL27.4688 mL68.6719 mL
5 mM0.5494 mL2.7469 mL5.4938 mL13.7344 mL
10 mM0.2747 mL1.3734 mL2.7469 mL6.8672 mL
15 mM0.1831 mL0.9156 mL1.8313 mL4.5781 mL
20 mM0.1373 mL0.6867 mL1.3734 mL3.4336 mL
25 mM0.1099 mL0.5494 mL1.0988 mL2.7469 mL
30 mM0.0916 mL0.4578 mL0.9156 mL2.2891 mL
40 mM0.0687 mL0.3434 mL0.6867 mL1.7168 mL
50 mM0.0549 mL0.2747 mL0.5494 mL1.3734 mL
60 mM0.0458 mL0.2289 mL0.4578 mL1.1445 mL
80 mM0.0343 mL0.1717 mL0.3434 mL0.8584 mL
100 mM0.0275 mL0.1373 mL0.2747 mL0.6867 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础