RIPK2-IN-8 是一种具有口服活性的高选择性 RIPK2 抑制剂(IC50 = 11 nM),其对 RIPK2 的选择性高于 RIPK1(IC50 > 30,000 nM),对 RIPK3 有中度抑制作用(IC50 = 44.61 nM),通过抑制 NOD2-RIPK2 信号通路及炎症因子 IL-6 和 TNFα 的表达发挥抗炎作用,并在急性肝损伤(ALI)模型中显示出抗炎和保肝作用,可用于 ALI 研究。
产品编号: MS-K42234 CAS No.: 3036254-29-9 分子式: C22H20FN5Os2 分子量: 453.56
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

RIPK2-IN-8 是一种具有口服活性的高选择性 RIPK2 抑制剂(IC50 = 11 nM),其对 RIPK2 的选择性高于 RIPK1(IC50 > 30,000 nM),对 RIPK3 有中度抑制作用(IC50 = 44.61 nM),通过抑制 NOD2-RIPK2 信号通路及炎症因子 IL-6 和 TNFα 的表达发挥抗炎作用,并在急性肝损伤(ALI)模型中显示出抗炎和保肝作用,可用于 ALI 研究。

生物实验数据

生物活性 RIPK2-IN-8 is an orally active, highly selective RIPK2 inhibitor (IC50 = 11 nM) that exhibits greater selectivity for RIPK2 over RIPK1 (IC50 > 30,000 nM) and moderate inhibition of RIPK3 (IC50 = 44.61 nM), exerts anti-inflammatory effects by inhibiting the NOD2-RIPK2 signaling pathway and the expression of the inflammatory cytokines IL-6 and TNFα, and demonstrates anti-inflammatory and hepatoprotective effects in acute liver injury (ALI) models, making it suitable for ALI research.
IC50 & Target RIPK2:11 nM
体外研究
(In Vitro)

RIPK2-IN-8 (Compound HY3) (0-10 μM,0.5-6 小时) 在 L18-MDP (MS-Y68812) 刺激的 THP-1 细胞中可延缓 NF-kB 和 MAPK 的活化,且不影响蛋白表达或细胞活力。
RIPK2-IN-8 (1 μM) 对炎症相关激酶 (如 BTK、FLT3、JNK2α2、SAPK3、MSK1、MAPKAP-K2) 几乎没有抑制活性。
RIPK2-IN-8 对 H9C2 细胞具有较弱的细胞毒性 (IC50 > 40 μM)。
RIPK2-IN-8 在 Muramyl dipeptide (MDP) (MS-G06325) 刺激的 THP-1 细胞中抑制 IL-8 的产生,IC50 为 29 nM。

Western Blot Analysis

Cell Line: THP-1 cells were stimulated with L18-MDP
Concentration: 0 μM, 0.001 μM, 0.003 μM, 0.01 μM, 0.03 μM, 0.1 μM, 0.3 μM, 1 μM, 3 μM, 10 μM
Incubation Time: 0.5 h, 6 h
Result: Delayed phosphorylation of p65, p38, and JNK. At 1 μM, did not alter the total levels of p65, p38, JNK, and β-actin.
Did not affect phosphorylation of RIPK3 or MLKL, key markers of necroptotic signaling.
体内研究
(In Vivo)

RIPK2-IN-8 (Compound HY3) (7.5-30 mg/kg,口服,一次) 在 MDP 诱导的腹膜炎小鼠模型中抑制 RIPK2 激酶活性,从而阻断下游炎症信号的激活,并进一步影响细胞因子 IL-6 的合成和释放。
RIPK2-IN-8 (5-20 mg/kg,口服,一次) 在 Acetaminophen (APAP) (MS-H20928) 诱导的 ALI 模型中通过抑制炎症细胞因子的表达发挥保肝作用,从而降低血清炎症标志物水平,减轻肝损伤。

Animal Model: MDP-induced (100 μg, i.p.) peritonitis mice (Female C57BL/6 at 8 weeks of age) model
Dosage: 7.5 mg/kg, 15 mg/kg, 30 mg/kg
Administration: p.o., once
Result: Reduced IL-6 levels, with IL-6 levels dropping to 23.9 pg/mL at 30 mg/kg, comparable to the RIPK2-positive compound GSK2983559 (MS-F75224).
Animal Model: APAP-induced (500 mg/kg, i.p.) ALI mice (Female C57BL/6 at 8 weeks of age) model
Dosage: 5 mg/kg, 10 mg/kg, 20 mg/kg
Administration: p.o., once
Result: Reduced ALT and AST levels, particularly in the high-dose group, where ALT and AST levels decreased to 202 and 275 U/L, respectively.
Reduced serum and mRNA levels of IL-6 and TNFα.

化学信息

分子量 453.56
分子式 C22H20FN5Os2
CAS No. 3036254-29-9

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础