CDK6-IN-2 是一种 IC50 为 0.013 μM 的 CDK6 共价抑制剂,可抑制三阴性乳腺癌细胞的增殖与迁移、诱导细胞周期阻滞和凋亡 (apoptosis),并通过细胞代谢重编程诱导 ROS 积累与线粒体损伤,具有抗肿瘤活性,可用于三阴性乳腺癌的研究。
CDK6-IN-2
产品编号: MS-K36014 分子式: C24H29BrN6O3 分子量: 529.43
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

CDK6-IN-2 是一种 IC50 为 0.013 μM 的 CDK6 共价抑制剂,可抑制三阴性乳腺癌细胞的增殖与迁移、诱导细胞周期阻滞和凋亡 (apoptosis),并通过细胞代谢重编程诱导 ROS 积累与线粒体损伤,具有抗肿瘤活性,可用于三阴性乳腺癌的研究。

生物实验数据

生物活性 CDK6-IN-2 is a covalent CDK6 inhibitor with an IC50 of 0.013 μM that inhibits the proliferation and migration of triple-negative breast cancer cells, induces cell cycle arrest and apoptosis, and promotes ROS accumulation and mitochondrial damage through cellular metabolic reprogramming, exhibiting antitumor activity and being applicable for research on triple-negative breast cancer.
IC50 & Target

CDK6

0.013 μM (IC50)

Caspase 3

 

体外研究
(In Vitro)

CDK6-IN-2 (compound C32) (72 h) 可选择性抑制 TNBC 和 BRCA1 突变型乳腺癌细胞的活力,其 IC50 值 ≤ 0.08 μM,而对正常乳腺上皮细胞和 ER 阳性乳腺癌细胞的活性较低。
CDK6-IN-2 (0-0.2 μM; 0-72 h) 可强效抑制 MDA-MB-231 和 BT-549 三阴性乳腺癌 (TNBC) 细胞增殖、迁移,诱导细胞凋亡、细胞周期阻滞和细胞内 ROS 累积。
CDK6-IN-2 (0-0.20 μM; 72 h) 可在 MDA-MB-231 和 BT-549 三阴性乳腺癌 (TNBC) 细胞中诱导线粒体损伤与功能异常,包括膜电位降低和结构异常。
CDK6-IN-2 (0-0.20 μM; 72 h) 可抑制 MDA-MB-231 和 BT-549 三阴性乳腺癌 (TNBC) 细胞中的自噬流与降解过程,LC3II 和 P62 蛋白的共同积累可证明这一点。

Cell Viability Assay

Cell Line: Triple-negative breast cancer (TNBC) lines MDA-MB-231, MDA-MB-468, BT-549; BRCA1-mutant line MDA-MB-436; ER-positive line MCF-7; normal mammary epithelial line MCF-10A
Concentration: /
Incubation Time: 72 h
Result: Selectively inhibited the viability of TNBC and BRCA1-mutant breast cancer cells with IC50 values of 0.06 μM (MDA-MB-231), 0.08 μM (MDA-MB-468), 0.04 μM (BT-549), and 0.06 μM (MDA-MB-436).
Showed reduced activity against non-TNBC cells with IC50 = 0.39 μM (MCF-7), 2.30 μM (MCF-10A).

Cell Proliferation Assay

Cell Line: TNBC cell lines MDA-MB-231 and BT-549
Concentration: MDA-MB-231: 0.1, 0.15, 0.2 μM; BT-549: 0.08, 0.12, 0.16 μM
Incubation Time: 72 h
Result: Concentration-dependently reduced the number of EdU-positive proliferating cells in both TNBC lines.

Cell Cycle Analysis

Cell Line: TNBC cell line MDA-MB-231
Concentration: 0.10, 0.15, 0.20 μM
Incubation Time: 72 h
Result: Induced a concentration-dependent S-phase cell cycle arrest, with the proportion of S-phase cells increasing from 35.91% (control) to 40.68% (0.10 μM), 48.31% (0.15 μM), and 55.9% (0.20 μM), while the proportion of G0/G1-phase cells decreased correspondingly.
体内研究
(In Vivo)

CDK6-IN-2 (10-20 mg/kg; i.p.; daily; 18 days) 可剂量依赖性地抑制 BALB/c 裸鼠体内 MDA-MB-231 肿瘤的生长。

Animal Model: BALB/c nude (female, 4 weeks old, subcutaneous inoculation of 1×107 MDA-MB-231 cells)
Dosage: 10 mg/kg; 20 mg/kg
Administration: i.p.; daily; 18 days
Result: Reduced mean tumor weight to 0.68 g (10 mg/kg group) and 0.23 g (20 mg/kg group), significantly lower than the control group's 1.45 g.
Significantly down-regulated Ki67, CDK6, and RB1 positive cell counts in treated tumor tissues.
Significantly up-regulated Cleaved Caspase-3 positive cell counts in treated tumor tissues.
Caused no significant changes in mouse body weight.
Showed no pathological damage to major organs (heart, liver, spleen, lung, kidney) via H&E staining.

化学信息

分子量 529.43
分子式 C24H29BrN6O3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础