TN1 是一种有效的胎儿型血红蛋白 (HbF) 诱导剂。
产品编号: MS-J56108 纯度: 96.25% CAS No.: 289479-94-3 分子式: C29H31N7O2 分子量: 509.60
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

TN1 是一种有效的胎儿型血红蛋白 (HbF) 诱导剂。

生物实验数据

生物活性 TN1 is a potent inducer of fetal hemoglobin (HbF).
IC50 & Target

fetal hemoglobin (HbF)

体外研究
(In Vitro)

A high-throughput screen of a large chemical library identifies a 2,6-diamino-substituted purine, TN1, which induces fetal hemoglobin (HbF) more potently than hydroxyurea in KU812 and K562 leukemia cell lines.TN1 increases HbF protein in both leukemic KU812 and K562 cells in a dose-dependent manner. At 100 nM concentration, Western blot analysis indicated that TN1 increased γ-globin expression (2.9- and 3.7-fold increase in KU812 cell and K562 cell, respectively) to higher levels than 50-100 μM HU (1.8- and 1.9-fold increase in KU812 cell and K562 cell, respectively), the first drug approved for the treatment of SCD. The EC50 value for TN1-mediated HbF induction is approximately three orders of magnitude lower than that of HU (HU: EC50=50-100 μM; TN1: EC50=100 nM). In addition, TN1 is more potent than a number of previously reported small-molecule HbF inducers including sodium butyrate and other histone deacetylase (HDAC) inhibitors. At the concentrations tested, TN1, as well as hemin and HU, increase γ-globin mRNA transcription (greater than fourfold), indicating that TN1 increases γ-globin levels at both the transcriptional and protein level. The time course of TN1-induced γ-globin mRNA and protein synthesis is measured and both increase after approximately 24 h of treatment. TN1 also induces β-globin mRNA in addition to γ-globin mRNA, similar to hydroxyurea.

性状 固体
颜色 White to light yellow

化学信息

分子量 509.60
分子式 C29H31N7O2
CAS No. 289479-94-3

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 3.3 mg/mL (6.48 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 25 mg/mL (49.06 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.9623 mL9.8116 mL19.6232 mL49.0581 mL
5 mM0.3925 mL1.9623 mL3.9246 mL9.8116 mL
10 mM0.1962 mL0.9812 mL1.9623 mL4.9058 mL
15 mM0.1308 mL0.6541 mL1.3082 mL3.2705 mL
20 mM0.0981 mL0.4906 mL0.9812 mL2.4529 mL
25 mM0.0785 mL0.3925 mL0.7849 mL1.9623 mL
30 mM0.0654 mL0.3271 mL0.6541 mL1.6353 mL
40 mM0.0491 mL0.2453 mL0.4906 mL1.2265 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 2 years; -20°C, 1 year。-80°C储存时,请在2年内使用, -20°C储存时,请在1年内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础