Flubendiamide

Synonyms: NNI-0001
Flubendiamide (NNI-0001) 是一种具有口服活性的邻苯二甲酸二酰胺类杀虫剂,通过靶向昆虫的兰尼碱受体 (RyRs) 发挥作用,导致昆虫肌肉功能失调、瘫痪和死亡;它还会破坏蜕皮、变态发育和生殖过程,通过升高 ROS/RNS、MDA、8OHdG 水平并降低 SOD、CAT、GST 水平诱导氧化应激,激活 CncC/Maf 凋亡 (apoptosis) 通路,破坏钙稳态,促进脂肪生成,增加甘油三酯积累,并上调脂肪细胞分化和脂肪生成调控因子的表达。
产品编号: MS-J01852 纯度: 99.42% CAS No.: 272451-65-7 分子式: C23H22F7In2O4S 分子量: 682.39
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价

产品描述

Flubendiamide (NNI-0001) 是一种具有口服活性的邻苯二甲酸二酰胺类杀虫剂,通过靶向昆虫的兰尼碱受体 (RyRs) 发挥作用,导致昆虫肌肉功能失调、瘫痪和死亡;它还会破坏蜕皮、变态发育和生殖过程,通过升高 ROS/RNS、MDA、8OHdG 水平并降低 SOD、CAT、GST 水平诱导氧化应激,激活 CncC/Maf 凋亡 (apoptosis) 通路,破坏钙稳态,促进脂肪生成,增加甘油三酯积累,并上调脂肪细胞分化和脂肪生成调控因子的表达。

生物实验数据

生物活性 Flubendiamide (NNI-0001) is an orally active phthalic acid diamide insecticide that acts by targeting insect ryanodine receptors (RyRs), leading to muscle dysfunction, paralysis, and death in insects; it also disrupts molting, metamorphosis, and reproduction, induces oxidative stress by elevating ROS/RNS, MDA, and 8OHdG levels while reducing SOD, CAT, and GST levels, activates the CncC/Maf apoptosis pathway, disrupts calcium homeostasis, promotes lipogenesis, increases triglyceride accumulation, and upregulates the expression of adipocyte differentiation and lipogenesis regulatory factors.
体外研究
(In Vitro)

Flubendiamide (0-30 μM; 10-20 μM) 可通过沟槽结合机制与小牛胸腺 DNA 中等强度结合,结合常数为 49 μM,并能改变 ct DNA 的二级结构。
Flubendiamide (3 µM) 可在意大利蜜蜂 Apis mellifera 预蛹离体培养的解离初级触角神经元中诱导持续性钙瞬变,其平均最大振幅为 0.50 ΔF/F。
Flubendiamide (1-10 μM; 8 days) 可促进 3T3-L1 脂肪细胞内甘油三酯的积累。
Flubendiamide (1-10 μM; 8 days) 在 10 μM 浓度下可上调成脂调控因子 C/EBPα 和 PPARγ,并通过降低 AMPKα 和 ACC 的磷酸化水平抑制 AMPKα 信号通路;该作用于 3T3-L1 脂肪细胞处理 8 天后观察到,1 μM 浓度下的作用效果更弱。
Flubendiamide (10 μM; 8 days) 可增强 3T3-L1 脂肪细胞中甘油三酯的积累,该作用在与 40 μM 的 AMPKα 激活剂 AICAR 共同处理后被逆转。
Flubendiamide (10 μM; 8 days) 可上调 C/EBPα 并抑制 3T3-L1 脂肪细胞中 AMPKα 的磷酸化。
Flubendiamide (10 μM; 8 days) 可促进 3T3-L1 脂肪细胞中甘油三酯的积累。

Western Blot Analysis

Cell Line: 3T3-L1 adipocytes
Concentration: 1 μM, 10 μM
Incubation Time: 8 days
Result: Significantly increased protein expression of adipocyte differentiation regulators C/EBPα and PPARγ, and significantly decreased phosphorylation of AMPKα and its downstream target acetyl-CoA carboxylase (ACC) relative to control at 10 μM.
Resulted in a non-significant increase in C/EBPα and PPARγ expression, and a significant decrease in p-AMPKα/AMPKα and p-ACC/ACC ratios relative to control at 1 μM, though the magnitude of change was smaller than at 10 μM.

Western Blot Analysis

Cell Line: 3T3-L1 adipocytes
Concentration: 10 μM flubendiamide, 40 μM AICAR
Incubation Time: 8 days
Result: Increased C/EBPα protein expression and decreased p-AMPKα/AMPKα ratios relative to control when used alone at 10 μM.
Abolished the flubendiamide-induced changes in C/EBPα and p-AMPKα expression when co-treated with 40 μM AICAR.
Abolished the flubendiamide-induced changes in C/EBPα and p-AMPKα expression when co-treated with 10 μM A769662.
体内研究
(In Vivo)

Flubendiamide (20-80 μg/mL;口服;单次暴露) 对斜纹夜蛾具有浓度和时间依赖性毒性。
Flubendiamide (200 mg/kg;口服;每日;1-14 天) 会在大鼠肝脏和脂肪组织中生物蓄积,以 200 mg/kg 的剂量每日口服给药 1、7 或 14 天后,其在肝脏中的浓度达 19-27 mg/kg,在脂肪组织中的浓度达 47-68 mg/kg。

Animal Model: 3rd generation, 4th instar larvae, 120 h old, uniform size
Dosage: 20 μg/mL; 40 μg/mL; 60 μg/mL; 80 μg/mL
Administration: oral; single exposure; observation over 12-72 hours
Result: Induced concentration- and time-dependent toxicity in Spodoptera litura, including 45.33% larval mortality at 80 μg/mL (24 hours), oxidative stress, genotoxic damage, gut tissue injury, disrupted life cycle and reproduction, and altered expression of stress, apoptotic, and ecdysone receptor genes.
Animal Model: Fischer F344/DuCrj (female)
Dosage: 200 mg/kg
Administration: p.o.; daily; 1, 7, or 14 days
Result: Reached peak plasma levels of ~20 µM after oral daily dosing for 1, 7, or 14 days.
Accumulated to liver levels of 19-27 mg/kg after oral daily dosing for 1, 7, or 14 days.
Accumulated to fat tissue levels of 47-68 mg/kg after oral daily dosing for 1, 7, or 14 days.
性状 固体
颜色 White to off-white

化学信息

分子量 682.39
分子式 C23H22F7In2O4S
CAS No. 272451-65-7
别名 NNI-0001

储存&溶解度

储存方式

4°C, protect from light

*In solvent: -80°C, 6 months; -20°C, 1 month (protect from light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 125 mg/mL (183.18 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.4654 mL7.3272 mL14.6544 mL36.6359 mL
5 mM0.2931 mL1.4654 mL2.9309 mL7.3272 mL
10 mM0.1465 mL0.7327 mL1.4654 mL3.6636 mL
15 mM0.0977 mL0.4885 mL0.9770 mL2.4424 mL
20 mM0.0733 mL0.3664 mL0.7327 mL1.8318 mL
25 mM0.0586 mL0.2931 mL0.5862 mL1.4654 mL
30 mM0.0488 mL0.2442 mL0.4885 mL1.2212 mL
40 mM0.0366 mL0.1832 mL0.3664 mL0.9159 mL
50 mM0.0293 mL0.1465 mL0.2931 mL0.7327 mL
60 mM0.0244 mL0.1221 mL0.2442 mL0.6106 mL
80 mM0.0183 mL0.0916 mL0.1832 mL0.4579 mL
100 mM0.0147 mL0.0733 mL0.1465 mL0.3664 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (protect from light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础