Autotaxin-IN-8(Compound 14E)是一种具有口服活性的 Autotaxin 抑制剂,对 hAutotaxin 的 IC50 为 14.2 nM,可抑制 Autotaxin 活性、MAPK 激活以及 LPAR1 和 p-ERK1/2,降低 JNK 和 p38 的磷酸化水平,并减少肺纤维化小鼠模型中的胶原沉积,因此可用于肺纤维化的相关研究。
产品编号: MS-J00852 CAS No.: 3058084-21-9 分子式: C21H20ClN9O 分子量: 449.90
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Autotaxin-IN-8(Compound 14E)是一种具有口服活性的 Autotaxin 抑制剂,对 hAutotaxin 的 IC50 为 14.2 nM,可抑制 Autotaxin 活性、MAPK 激活以及 LPAR1 和 p-ERK1/2,降低 JNK 和 p38 的磷酸化水平,并减少肺纤维化小鼠模型中的胶原沉积,因此可用于肺纤维化的相关研究。

生物实验数据

生物活性 Autotaxin-IN-8 (Compound 14E) is an orally active Autotaxin inhibitor with an IC50 of 14.2 nM against hAutotaxin that inhibits Autotaxin activity, suppresses MAPK activation, inhibits LPAR1 and p-ERK1/2, reduces the phosphorylation levels of JNK and p38, and decreases collagen deposition in a mouse model of pulmonary fibrosis, and can therefore be used in research related to pulmonary fibrosis.
IC50 & Target

ERK1

 

ERK2

 

LPA1 Receptor

 

Autotaxin

14.2 nM (IC50)

体外研究
(In Vitro)

Autotaxin-IN-8 可强效抑制重组 hATX 的酶活性,其 IC50 为 14.2 nM。
Autotaxin-IN-8 (24 h) 对人正常肺上皮 L132 细胞的细胞毒性较低,其 IC50 为 94.31 μM。
Autotaxin-IN-8 (1 μM; 12 h) 可在 12 h 内显著抑制 A549 细胞的基础迁移、TGF-β 刺激的迁移以及 LPC 刺激的迁移。
Autotaxin-IN-8 (1 μM; 48 h) 可在 48 h 内显著降低 MLg 细胞的自发性、TGF-β 诱导性及 LPC 诱导性胶原凝胶收缩。

Western Blot Analysis

Cell Line: Human normal lung epithelial L132 cells
Concentration: 0.1-5.0 μM (concentration-dependent study); 0.5 μM (time-dependent study); 0.5 μM (LPC/LPA co-treatment pre-incubation); 0.5 μM (TGF-β co-treatment pre-incubation)
Incubation Time: 75 min (concentration-dependent study); 30-75 min (time-dependent study); 75 min pre-incubation + 15 min LPC/LPA stimulation (co-treatment); 3 h pre-incubation + 3 h TGF-β stimulation (co-treatment)
Result: Inhibited phosphorylation of p-JNK with an EC50 of 0.958 μM, p-p38 with an EC50 of 0.785 μM, and p-ERK1/2 with an EC50 of 0.297 μM, with marked inhibition at concentrations as low as 0.5 μM.
Inhibited phosphorylation of p-JNK with an estimated time of 35.4 min, p-p38 with an estimated time of 39.13 min, and p-ERK1/2 with an estimated time of 30.46 min, with effects observed within 30 min.
Suppressed LPC-induced activation of p-JNK, p-p38, and p-ERK1/2 but had no effect on LPA-induced activation.
Significantly reduced TGF-β-induced phosphorylation of JNK, ERK, and p38.
体内研究
(In Vivo)

Autotaxin-IN-8 (1 mg/kg;口服;单次) 可对雌性 Wistar 大鼠血浆中的 LPA18:2 实现高达 97% 的抑制率,且其抑制率维持在 75% 以上的时长可达 12 小时。
Autotaxin-IN-8 (1-3 mg/kg;口服;每日一次;21 天) 可在 Bleomycin (MS-K75594) 诱导的肺纤维化小鼠模型中减少胶原沉积、纤维化标志物表达及炎症反应。

Animal Model: C57BL/6 (male, 8 weeks old, bleomycin-induced pulmonary fibrosis)
Dosage: 1 mg/kg; 3 mg/kg
Administration: p.o.; daily; 21 days
Result: Markedly reduced bleomycin-induced collagen deposition in lung tissue.
Decreased lung tissue expression of α-SMA and TGF-β.
Suppressed the bleomycin-induced increase in LPAR1 and p-ERK1/2.
Mitigated bleomycin-provoked inflammatory responses by reducing IL-1β and IL-6 expression in lung tissue.

化学信息

分子量 449.90
分子式 C21H20ClN9O
CAS No. 3058084-21-9

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础