BMS-P5 是一种选择性口服活性肽基精氨酸脱亚胺酶 4 (PAD4) 抑制剂,IC50 为 98 nM,对 PAD4 的选择性优于 PAD1、PAD2 和 PAD3,可阻断多发性骨髓瘤 (MM) 诱导的中性粒细胞胞外陷阱 (NET) 形成,并延缓同基因小鼠模型中 MM 的进展。
产品编号: MS-H78579 纯度: 99.23% CAS No.: 1549811-36-0 分子式: C27H33ClN6O2 分子量: 509.04
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

BMS-P5 是一种选择性口服活性肽基精氨酸脱亚胺酶 4 (PAD4) 抑制剂,IC50 为 98 nM,对 PAD4 的选择性优于 PAD1、PAD2 和 PAD3,可阻断多发性骨髓瘤 (MM) 诱导的中性粒细胞胞外陷阱 (NET) 形成,并延缓同基因小鼠模型中 MM 的进展。

生物实验数据

生物活性 BMS-P5 is a selective, orally active peptidylarginine deiminase 4 (PAD4) inhibitor with an IC50 of 98 nM that is more selective for PAD4 than for PAD1, PAD2, and PAD3, and it blocks multiple myeloma (MM)-induced neutrophil extracellular trap (NET) formation and delays MM progression in a syngeneic mouse model.
体外研究
(In Vitro)

BMS-P5 blocks calcium ionophore-induced citrullination of histone H3.
BMS-P5 is also able to inhibit formation of NETs induced by primary MM cells isolated from the BM of patients with MM.

Cell Viability Assay

Cell Line: Neutrophils.
Concentration: 10 µM and 100 µM.
Incubation Time: 30 min followed by addition of DP42 or 5TGM1 CM.
Result: Prevented MM-induced NET formation.
体内研究
(In Vivo)

BMS-P5 (50 mg/kg, oral gavage) significantly improves survival of MM-bearing mice.
BMS-P5 (50 mg/kg, oral gavage) may attenuate the presence of pro-tumorigenic proteins in the tumor microenvironment, and thus delay tumor progression.

Animal Model: Syngeneic mouse model of MM.
Dosage: 50 mg/kg.
Administration: Oral gavage, twice a day beginning on day 3 after tumor cell injection.
Result: Significantly delayed development of symptoms and significantly prolonged survival of MM-bearing mice.
性状 固体
颜色 Off-white to light yellow

化学信息

分子量 509.04
分子式 C27H33ClN6O2
CAS No. 1549811-36-0

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 7.5 mg/mL (14.73 mM), Solution.
10% DMSO+90% Saline: < 7.5 mg/mL (14.73 mM), Lower concentrations may be soluble, but exact solubility limit is unknown.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 35 mg/mL (68.76 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.9645 mL9.8224 mL19.6448 mL49.1121 mL
5 mM0.3929 mL1.9645 mL3.9290 mL9.8224 mL
10 mM0.1964 mL0.9822 mL1.9645 mL4.9112 mL
15 mM0.1310 mL0.6548 mL1.3097 mL3.2741 mL
20 mM0.0982 mL0.4911 mL0.9822 mL2.4556 mL
25 mM0.0786 mL0.3929 mL0.7858 mL1.9645 mL
30 mM0.0655 mL0.3274 mL0.6548 mL1.6371 mL
40 mM0.0491 mL0.2456 mL0.4911 mL1.2278 mL
50 mM0.0393 mL0.1964 mL0.3929 mL0.9822 mL
60 mM0.0327 mL0.1637 mL0.3274 mL0.8185 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础