Polyinosinic-polycytidylic acid

Synonyms: Poly(I:C)
Polyinosinic-polycytidylic acid (Poly(I:C)) 是双链 RNA 的合成类似物,作为 TLR3 和视黄酸诱导型基因 I 受体 (RIG-I 和 MDA5) 的激动剂,既可用作疫苗佐剂以增强先天性和适应性免疫反应并改变肿瘤微环境,也可直接触发癌细胞发生凋亡 (apoptosis)。
产品编号: MS-H44982 含量: 99.40% CAS No.: 24939-03-5 分子式: (C10H13N4O8P)x.(C9H14N3O8P)x
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价

产品描述

Polyinosinic-polycytidylic acid (Poly(I:C)) 是双链 RNA 的合成类似物,作为 TLR3 和视黄酸诱导型基因 I 受体 (RIG-I 和 MDA5) 的激动剂,既可用作疫苗佐剂以增强先天性和适应性免疫反应并改变肿瘤微环境,也可直接触发癌细胞发生凋亡 (apoptosis)。

生物实验数据

生物活性 Polyinosinic-polycytidylic acid (Poly(I:C)) is a synthetic analog of double-stranded RNA that acts as an agonist of TLR3 and retinoic acid-inducible gene I receptors (RIG-I and MDA5), and can be used as a vaccine adjuvant to enhance innate and adaptive immune responses and alter the tumor microenvironment, as well as directly trigger apoptosis in cancer cells.
IC50 & Target

Bcl-2

 

MDA5

 

RIG-I

 

Bax

 

IL-17A

 

IL-13

 

HSP70

 

体外研究
(In Vitro)

Polyinosinic-polycytidylic acid (0.5-5 μg/mL, 3-24 h) 呈现剂量和时间依赖性增加诱导永生化气道上皮细胞的细胞旁通透性。
Polyinosinic-polycytidylic acid (5 μg/mL, 24 h) 对 16HBE14o- 细胞没有细胞毒性。
Polyinosinic-polycytidylic acid (5 μg/mL, 6 h) 在 16HBE14o- 细胞中诱导上皮顶端连接复合体和紧密连接的破坏。

Cell Cytotoxicity Assay

Cell Line: 16HBE14o- cells
Concentration: 5 μg/mL
Incubation Time: 24 h
Result: Did not lead to significant accumulation of LDH in cell-culture medium.
体内研究
(In Vivo)

Polyinosinic-polycytidylic acid (2.5-10 mg/mL, Stereotaxic injection, single dose) 在脑黑质和背外侧纹状体中诱导持续的炎症反应。
Polyinosinic-polycytidylic acid (10 μg/mouse, Intraperitoneal injection, single dose) 降低小鼠的肺肿瘤生长。
Polyinosinic-polycytidylic acid (1.25 mg/kg, Intraperitoneal injection, single dose) 在 MCAO 模型小鼠中通过 TLR3 下调TLR4/MyD88 信号通路发挥脑缺血再灌注损伤的治疗作用。

Animal Model: lung tumor-bearing mice
Dosage: 10 μg/mouse
Administration: Intraperitoneal injection (i.p.)
Result: Induced a significant decrease in the growth of pulmonary metastases in tumor-bearing mice.
Reduced the amount of lung foci to ≈ 40%.
Significantly increased BAL fluid cell numbers.
Increased the level of INF-γ and IL-17A, decreased the levels of IL-13.
Increased TLR3 expression.
Animal Model: Middle cerebral artery occlusion (MCAO) model mice
Dosage: 1.25 mg/kg
Administration: Intraperitoneal injection (i.p.)
Result: Reduced focal cerebral I/R injury.
Increased the expression of Bcl2, Hsp27, and Hsp70, decreased Bax expression, and reduced cellular degeneration and apoptosis.
Protected against cerebral ischemia and conferred protection against cerebral I/R injury through the downregulation of TLR4 signaling via TLR3.
性状 固体
颜色 White to off-white

化学信息

分子式 (C10H13N4O8P)x.(C9H14N3O8P)x
CAS No. 24939-03-5
别名 Poly(I:C)

储存&溶解度

溶解度信息
H2O: 128.80 mg/mL (191.84 mM), Sonication is recommended.
DMSO: < 1 mg/mL (insoluble or slightly soluble)
储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础