BRD9876 是一种“rigor”抑制剂,可将驱动蛋白 5 (Eg5) 锁定在增强微管 (MTs) 结合的状态,从而导致 MT 的捆绑和稳定;它通过与酪氨酸 104 残基相互作用发挥作用,该残基是 α4-α6 变构结合口袋的一部分,并特异性靶向微管结合的 Eg5,选择性抑制 CD34 细胞的骨髓瘤,具有用于多发性骨髓瘤 (MM) 研究的潜力。
产品编号: MS-H04961 纯度: 99.37% CAS No.: 32703-82-5 分子式: C16H14N2 分子量: 234.30
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
500mg
询价
3-5 天
1g
询价
询价
5g
询价
询价
(0.1 - 0.2mg)
询价
询价

产品描述

BRD9876 是一种“rigor”抑制剂,可将驱动蛋白 5 (Eg5) 锁定在增强微管 (MTs) 结合的状态,从而导致 MT 的捆绑和稳定;它通过与酪氨酸 104 残基相互作用发挥作用,该残基是 α4-α6 变构结合口袋的一部分,并特异性靶向微管结合的 Eg5,选择性抑制 CD34 细胞的骨髓瘤,具有用于多发性骨髓瘤 (MM) 研究的潜力。

生物实验数据

生物活性 BRD9876 is a "rigor" inhibitor that locks kinesin-5 (Eg5) in a state of enhanced microtubule (MTs) binding, thereby inducing MT bundling and stabilization; it interacts with the tyrosine 104 residue, which is part of the α4-α6 allosteric binding pocket, and specifically targets microtubule-bound Eg5, selectively inhibiting myeloma in CD34 cells, showing potential for multiple myeloma (MM) research.
体外研究
(In Vitro)

BRD9876 (10 μM; 24 hours) reveales rapid arrest of cells at the G2/M phase starting as early as 2h of treatment in MM1S cells.
BRD9876 exhibits approximately 3-fold selectivity for MM1S myeloma cells (IC50=3.1 μM) over CD34+ derived hematopoietic cells (IC50=9.1 μM).
BRD9876 (0.1, 1, 10, 100 uM) is able to overcome, in MM1S cells, stromal resistance of bone marrow stromal cells (BMSCs) from MM bone marrow aspirates but only minimal effects are observed with BRD9876 against primary MM cells.
BRD9876 is completely ineffective at inhibiting the basal ATPase activity of Eg5, in contrast to loop L5-binding monastrol or α4/α6-binding BI8 which shows greater activity against basal Eg5 ATPase activity.

Cell Cycle Analysis

Cell Line: MM1S cells and CD34 hematopoietic cells
Concentration: 10 μM
Incubation Time: 24 hours
Result: Revealed rapid arrest of cells at the G2/M phase starting as early as 2h of treatment in MM1S cells.
Showed markedly less G2/M arrest in CD34 hematopoietic cells.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 234.30
分子式 C16H14N2
CAS No. 32703-82-5

储存&溶解度

储存方式

Store at room temperature, keep dry and cool

In solvent -80°C 1 year
-20°C 6 months
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMF 中的溶解度 : 1 mg/mL (4.27 mM; 超声助溶 (<60°C))

可选溶剂浓度1 mg5 mg10 mg25 mg
DMF1 mM4.2680 mL21.3402 mL42.6803 mL106.7008 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 1 year; -20°C, 6 months。-80°C储存时,请在1年内使用, -20°C储存时,请在6个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础