Fast green FCF free acid

耐酸性的染料 Fast green FCF free acid 可抑制 α-synuclein 聚集以及 Aβ、P2X4 受体和 TLR4/Myd88/NF-κB,广泛用作染色剂,如在酸性提取 DNA 后在碱性 pH 下定量染色组蛋白以及在电泳中用作蛋白质染色剂,并可改善认知障碍、抑郁症、缓解疼痛过敏、促进生殖功能。
产品编号: MS-G54922 CAS No.: 25738-40-3 分子式: C37H36N2O10S3 分子量: 764.88
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

耐酸性的染料 Fast green FCF free acid 可抑制 α-synuclein 聚集以及 Aβ、P2X4 受体和 TLR4/Myd88/NF-κB,广泛用作染色剂,如在酸性提取 DNA 后在碱性 pH 下定量染色组蛋白以及在电泳中用作蛋白质染色剂,并可改善认知障碍、抑郁症、缓解疼痛过敏、促进生殖功能。

生物实验数据

生物活性 Fast green FCF free acid, an acid-resistant dye, inhibits α-synuclein aggregation and Aβ, P2X4 receptor, and TLR4/Myd88/NF-κB, is widely used as a staining agent, such as for quantitative staining of histones at alkaline pH after acidic DNA extraction and as a protein stain in electrophoresis, and improves cognitive impairment and depression, alleviates pain hypersensitivity, and promotes reproductive function.
IC50 & Target

α-synuclein Aggregation

 

体外研究
(In Vitro)

Fast Green FCF (HEWL/FCF free acid 摩尔比:1 比 0.01-1 比 1,10 天) free acid 以浓度依赖性方式抑制溶菌酶原纤维的生成,并对预先形成/存在的溶菌酶原纤维表现出分解活性。
Fast Green FCF (100 μg/mL-1 mg/mL) free acid 抑制大鼠海马中间神经元的突触活动,半最大有效浓度约为 200 μg/mL (250 μM)。
Fast Green FCF (5-100 μM, 24 h) free acid 抑制 α-突触核蛋白聚集,分解成熟原纤维并防止 PC12 细胞中淀粉样蛋白诱导的神经毒性。
Fast Green FCF (Aβ40 与 FGF 的摩尔比为 3:1-1:3) free acid 可减轻 Aβ40 纤维形成引起的 PC12 细胞毒性。

Cell Viability Assay

Cell Line: PC12 cells with α-syn fibrils
Concentration: 5, 25, 50, 100 μM
Incubation Time: 24 h
Result: Reduced the cytotoxicity, and the cell viability respectively reached 66.2% (5 μM) and 72.7% (25 μM).
Increased cell viability, reaching 76.4% (50 μM) and 89.0% (100 μM), respectively.
体内研究
(In Vivo)

Fast Green FCF (100 mg/kg,腹腔注射,每次试验前 30 min) free acid 可减轻小鼠 Aβ 诱导的认知障碍。
Fast Green FCF (10-100 mg/kg,腹腔注射,每日一次,手术前 30 min) free acid 通过下调小鼠 P2X4 受体来预防术后认知功能障碍。
Fast Green FCF (100 mg/kg,腹腔注射,每日一次,连续 7 天) free acid 可减轻脂多糖诱导的抑郁样行为,并下调小鼠海马中的 TLR4/Myd88/NF-κB 信号通路。
Fast Green FCF (30-100 mg/kg,腹腔注射,每日一次,共 9 天) free acid 可缓解疼痛过敏,并下调啮齿动物炎症疼痛模型中的脊髓 P2X4 表达和促炎细胞因子水平。
Fast Green FCF (0.017-0.041 g/Kg 体重,口服,42 天) free acid 可导致睾丸重量、管状直径、精子密度和精子活力显著下降。

Animal Model: Aβ-induced cognitive impairment mice
Dosage: 30, 100 mg/kg
Administration: Intraperitoneal injection (i.p.), 30 min prior to each trial
Result: Did not alter the recognition index.
Prevented the Aβ42-induced recognition impairment at 100 mg/kg.
Prevented the Aβ42-induced impairment of spatial learning at 100 mg/kg.
reduced the Aβ42-induced memory impairment.

化学信息

分子量 764.88
分子式 C37H36N2O10S3
CAS No. 25738-40-3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础