Givinostat hydrochloride

Synonyms: ITF-2357 hydrochloride
Givinostat (ITF-2357) hydrochloride 是一种 HDAC 抑制剂,可抑制 HDAC1 和 HDAC3(IC50 分别为 198 nM 和 157 nM),并能穿透血脑屏障(BBB)。
产品编号: MS-G17023 纯度: 98.06% CAS No.: 199657-29-9 分子式: C24H28ClN3O4 分子量: 457.95
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

Givinostat (ITF-2357) hydrochloride 是一种 HDAC 抑制剂,可抑制 HDAC1 和 HDAC3(IC50 分别为 198 nM 和 157 nM),并能穿透血脑屏障(BBB)。

生物实验数据

生物活性 Givinostat (ITF-2357) hydrochloride is an HDAC inhibitor that inhibits HDAC1 and HDAC3 with IC50 values of 198 nM and 157 nM, respectively, and is capable of crossing the blood-brain barrier (BBB).
IC50 & Target HD1-A:16 nM (IC50), HDAC9 (human):541 nM (IC50), HDAC1 (human):198 nM (IC50), HDAC3 (human):157 nM (IC50), HDAC2 (human):325 nM (IC50), HDAC10 (human):340 nM (IC50), HDAC11 (human):292 nM (IC50), HDAC4 (human):1059 nM (IC50), HDAC5 (human):532 nM (IC50), HD2:10 nM (IC50), HDAC8 (human):854 nM (IC50), HDAC6 (human):315 nM (IC50), HDAC7 (human):524 nM (IC50), HD1-B:7.5 nM (IC50)
体外研究
(In Vitro)

Givinostat (ITF2357) suppresses total LPS-induced IL-1β production robustly compared with the reduction by ITF3056. At 25, 50, and 100 nM, Givinostat reduces IL-1β secretion more than 70%. Givinostat suppresses the production of IL-6 in PBMCs stimulated with TLR agonists as well as the combination of IL-12 plus IL-18. IL-6 secretion decreases to 50% at 50 nM Givinostat, but at 100 and 200 nM, there is no reduction. Givinostat (ITF-2357) inhibits JS-1 cell proliferation in a concentration-dependent manner in the CCK-8 assay. Treatment with Givinostat (ITF-2357) ≥500 nM is associated with significant inhibition of JS-1 cell proliferation. Also, the cell inhibition rate significantly differs between the group cotreated with Givinostat (ITF-2357) ≥250 nM plus LPS and the group without LPS treatment.

体内研究
(In Vivo)

Givinostat (ITF2357) at 10 mg/kg is used as a positive control and reduces serum TNFα by 60%. Pretreatment of Givinostat (ITF-2357) starting at 0.1 mg/kg significantly reduces the circulating TNFα by nearly 90%. To achieve a significant increase in serum IL-1β production, a higher dose of LPS is injected (10 mg/kg), and blood is collected after 4 h.

性状 固体
颜色 White to off-white

化学信息

分子量 457.95
分子式 C24H28ClN3O4
CAS No. 199657-29-9
别名 ITF-2357 hydrochloride

储存&溶解度

体内实验配方
10% DMSO+90% Saline: 10 mg/mL (21.84 mM), Solution.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 175 mg/mL (382.14 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.1836 mL10.9182 mL21.8364 mL54.5911 mL
5 mM0.4367 mL2.1836 mL4.3673 mL10.9182 mL
10 mM0.2184 mL1.0918 mL2.1836 mL5.4591 mL
15 mM0.1456 mL0.7279 mL1.4558 mL3.6394 mL
20 mM0.1092 mL0.5459 mL1.0918 mL2.7296 mL
25 mM0.0873 mL0.4367 mL0.8735 mL2.1836 mL
30 mM0.0728 mL0.3639 mL0.7279 mL1.8197 mL
40 mM0.0546 mL0.2730 mL0.5459 mL1.3648 mL
50 mM0.0437 mL0.2184 mL0.4367 mL1.0918 mL
60 mM0.0364 mL0.1820 mL0.3639 mL0.9099 mL
80 mM0.0273 mL0.1365 mL0.2730 mL0.6824 mL
100 mM0.0218 mL0.1092 mL0.2184 mL0.5459 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础