Polyphyllin VI

Synonyms: 重楼皂苷VI
Polyphyllin VI 是一种具有抗癌活性的活性皂甙,可诱导 G2/M 细胞周期停滞并引发细胞凋亡,并通过在非小细胞肺癌中诱导 ROS/NF-κB/NLRP3/GSDMD 信号轴来诱导 caspase-1 介导的细胞焦亡 (pyroptosis)。
产品编号: MS-G05910 纯度: 98.49% CAS No.: 55916-51-3 分子式: C39H62O13 分子量: 738.90
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

Polyphyllin VI 是一种具有抗癌活性的活性皂甙,可诱导 G2/M 细胞周期停滞并引发细胞凋亡,并通过在非小细胞肺癌中诱导 ROS/NF-κB/NLRP3/GSDMD 信号轴来诱导 caspase-1 介导的细胞焦亡 (pyroptosis)。

生物实验数据

生物活性 Polyphyllin VI is an active saponin with anticancer activity that induces G2/M cell cycle arrest and triggers apoptosis, and induces caspase-1-mediated pyroptosis by inducing the ROS/NF-κB/NLRP3/GSDMD signaling axis in non-small cell lung cancer.
体外研究
(In Vitro)

Polyphyllin VI (0-16 μM;48 小时) 以剂量依赖性方式显着降低 A549、NCI-H1299 和 HepaRG 细胞的活力。
Polyphyllin VI (0.5-2 μM-1 μM;24 小时) 以剂量依赖性方式显着增加 A549 和 NCI-H1299 细胞处于 G2/M 期的百分比。
Polyphyllin VI (0-12 μM-1 μM;24 小时) 将 HepaRG 细胞阻滞于 S 期。
Polyphyllin VI (0-6 μM-1 μM;24 小时) 可激活 NLRP3 炎症小体。
Polyphyllin VI (0-6 μM-1 μM;24 小时) 通过 ROS/NF-κB 途径诱导 A549 和 NCI-H1299 细胞焦亡 (pyroptosis)。

Cell Viability Assay

Cell Line: A549, NCI-H1299, and HepaRG cells
Concentration: 0 μM, 2.5 μM, 5.0 μM, 7.5 μM, 10 μM, 12.5 μM (A549, NCI-H1299), 0 μM, 2 μM, 4.0 μM, 6.0 μM, 8.0 μM, 10.0 μM, 12.0 μM, 16.0 μM (HepaRG)
Incubation Time: 48 h (A549, NCI-H1299), 24 h and 48 h (HepaRG)
Result: Showed the IC50 value in NCI-H1299 cells after 48h treatment was 1.87±0.09 μM, 1.59±0.12 μM in A549.
Demonstrated the reduction of HepaRG cell viability ranged from 88.90% to 1.07% after 24 h, and from 79.06% to 0.71% after 48 h.

Cell Viability Assay

Cell Line: A549, NCI-H1299 cells
Concentration: 0.5 μM, 1.0 μM, 2.0 μM
Incubation Time: 24 h
Result: Showed those of A549 cells in G2/M phase were 25.14%±3.31%, 28.40%±4.63%, and 42.66%±1.30%, and NCI-H1299 cells were 27.99%±4.68%, 30.24%±3.61% and 38.51%±5.10% after treatment with 0.5, 1, and 2μM for 24 h, respectively.

Cell Cycle Analysis

Cell Line: HepaRG cells
Concentration: 0 μM, 2.0 μM, 4.0 μM, 6.0 μM, 8.0 μM, 12.0 μM
Incubation Time: 24 h
Result: Resulted the ratios of cells in the S and G0/G1 phase changed from 23.62%±0.14% to 34.01%±0.32%, 66.88%±1.15% to 54.00%±0.71%, respectively.

Western Blot Analysis

Cell Line: A549, NCI-H1299 cells
Concentration: 0 μM, 3 μM, 4 μM, 5 μM, 6 μM
Incubation Time: 24 h
Result: Resulted dose-dependently increasing the protein expression of NLRP3 and ASC, and the cleaved form of caspase-1, IL-1β, IL-18 and GSDMD in A549 and NCI-H1299 cells.

Immunofluorescence

Cell Line: A549, NCI-H1299 cells
Concentration: 0 μM, 3 μM, 4 μM, 5 μM, 6 μM
Incubation Time: 24 h
Result: Resulted the expression of caspase-1 was significantly inhibited by N-acetyl-L-cysteine (NAC) in Polyphyllin VI -treated A549 and NCI-H1299 cells.
体内研究
(In Vivo)

Polyphyllin VI (2-4 mg/kg;腹腔注射;每周 5 次,持续 4 周) 抑制肺癌肿瘤异种移植物的生长。
Polyphyllin VI (2.5-10 mg/kg;腹腔注射;连续 10 天) 在携带 A549 肿瘤的裸鼠中激活 NLRP3 炎性小体。

Animal Model: A549 tumor xenografts subcutaneously inoculated into the right flank of the nude mice
Dosage: 2 mg/kg, 3 mg/kg, 4 mg/kg
Administration: Intraperitoneal Injection (i.p.)
Result: Resulted the reduction of tumor volume to 25.63%, 41.71%, and 40.41%, respectively, after 2 mg/kg, 3 mg/kg and 4 mg/kg treatment.
Animal Model: A549 tumor xenografts subcutaneously inoculated into the right flank of the nude mice
Dosage: 2.5 mg/kg, 5 mg/kg, 10 mg/kg
Administration: Intraperitoneal Injection (i.p.)
Result: Showed the expression of NLRP3, caspase-1, IL-1β and GSDMD was increasing in a dose manner.
性状 固体
颜色 White to off-white

化学信息

分子量 738.90
分子式 C39H62O13
CAS No. 55916-51-3
别名 重楼皂苷VI

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 10 mg/mL (13.53 mM), Suspension.
10% DMSO+90% Saline: < 10 mg/mL (13.53 mM), Lower concentrations may be soluble, but exact solubility limit is unknown.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (135.34 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.3534 mL6.7668 mL13.5336 mL33.8341 mL
5 mM0.2707 mL1.3534 mL2.7067 mL6.7668 mL
10 mM0.1353 mL0.6767 mL1.3534 mL3.3834 mL
15 mM0.0902 mL0.4511 mL0.9022 mL2.2556 mL
20 mM0.0677 mL0.3383 mL0.6767 mL1.6917 mL
25 mM0.0541 mL0.2707 mL0.5413 mL1.3534 mL
30 mM0.0451 mL0.2256 mL0.4511 mL1.1278 mL
40 mM0.0338 mL0.1692 mL0.3383 mL0.8459 mL
50 mM0.0271 mL0.1353 mL0.2707 mL0.6767 mL
60 mM0.0226 mL0.1128 mL0.2256 mL0.5639 mL
80 mM0.0169 mL0.0846 mL0.1692 mL0.4229 mL
100 mM0.0135 mL0.0677 mL0.1353 mL0.3383 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 2 years; -20°C, 1 year。-80°C储存时,请在2年内使用, -20°C储存时,请在1年内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础