Human immunoglobulin E

Synonyms: 人免疫球蛋白E; Human IgE
Human immunoglobulin E (Human IgE) 是一种关键的免疫球蛋白和受体结合蛋白,通过增强 Na+/H+ 交换体 NHE1 的活性降低细胞外 pH 值,并与 FcεR1、TLR4 形成复合物启动信号转导通路,诱导炎性细胞因子/趋化因子表达及促炎、促凋亡 (apoptosis)、促动脉粥样硬化效应,同时可增强巨噬细胞中促动脉粥样硬化的 cathepsin S 和 K 的活性,与 LPS 或氧化型 LDL 协同提升巨噬细胞 IL-6 分泌能力,并上调肥大细胞表面 FcεRI 表达、与 IL-4 协同强化该蛋白表达,增强肥大细胞组胺、前列腺素 D2、白三烯 C4 等介质释放的敏感性与强度;其主要定位于人动脉粥样硬化病变的巨噬细胞富集区、平滑肌细胞纤维帽及内皮细胞,可用于冠心病、动脉粥样硬化、急性心肌梗死、不稳定型心绞痛、稳定型心绞痛及过敏性疾病的研究。
人免疫球蛋白E
产品编号: MS-F92026
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
100μg
询价
3-5 天

产品描述

Human immunoglobulin E (Human IgE) 是一种关键的免疫球蛋白和受体结合蛋白,通过增强 Na+/H+ 交换体 NHE1 的活性降低细胞外 pH 值,并与 FcεR1、TLR4 形成复合物启动信号转导通路,诱导炎性细胞因子/趋化因子表达及促炎、促凋亡 (apoptosis)、促动脉粥样硬化效应,同时可增强巨噬细胞中促动脉粥样硬化的 cathepsin S 和 K 的活性,与 LPS 或氧化型 LDL 协同提升巨噬细胞 IL-6 分泌能力,并上调肥大细胞表面 FcεRI 表达、与 IL-4 协同强化该蛋白表达,增强肥大细胞组胺、前列腺素 D2、白三烯 C4 等介质释放的敏感性与强度;其主要定位于人动脉粥样硬化病变的巨噬细胞富集区、平滑肌细胞纤维帽及内皮细胞,可用于冠心病、动脉粥样硬化、急性心肌梗死、不稳定型心绞痛、稳定型心绞痛及过敏性疾病的研究。

生物实验数据

生物活性 Human immunoglobulin E (Human IgE) is a key immunoglobulin and receptor-binding protein that lowers extracellular pH by enhancing the activity of the Na+/H+ exchanger NHE1 and forms a complex with FcεR1 and TLR4 to initiate signal transduction pathways, inducing inflammatory cytokine/chemokine expression and pro-inflammatory, pro-apoptotic (apoptosis), and pro-atherosclerotic effects; it also enhances the activity of the pro-atherosclerotic cathepsin S and K in macrophages, synergizes with LPS or oxidized LDL to increase macrophage IL-6 secretion capacity, upregulates mast cell surface FcεRI expression, synergizes with IL-4 to enhance this protein expression, and strengthens the sensitivity and intensity of mast cell release of mediators such as histamine, prostaglandin D2, and leukotriene C4; it is mainly localized to macrophage-rich areas, smooth muscle cell fibrous caps, and endothelial cells in human atherosclerotic lesions, and can be used for research on coronary heart disease, atherosclerosis, acute myocardial infarction, unstable angina, stable angina, and allergic diseases.
IC50 & Target

TLR4

 

体外研究
(In Vitro)

Human immunoglobulin E (50 μg/mL; 3 d) 可通过 NHE1 介导的细胞外酸化作用诱导人单核细胞来源巨噬细胞发生 caspase 依赖性凋亡。
Human immunoglobulin E (50 μg/mL; 2 d) 可通过激活 NHE1 诱导人单核细胞来源巨噬细胞产生 IL-6。
Human immunoglobulin E (6.25-100 μg/mL; 15 min) 激活 p38 和 JNK 信号通路,并诱导人主动脉内皮细胞中的 caspase-3 剪切。
Human immunoglobulin E (12.5-100 μg/mL) 可以浓度和密度依赖的方式降低人主动脉内皮细胞的存活率与增殖能力。
Human immunoglobulin E (100 μg/mL) 可激活 p38、JNK、NF-κB 和 ERK1/2 信号通路,上调促凋亡蛋白 BAX 的表达,并激活人主动脉平滑肌细胞中的半胱氨酸蛋白酶。
Human immunoglobulin E (12.5-100 μg/mL; 3 d) 可呈浓度依赖性降低人主动脉平滑肌细胞的存活率。
Human immunoglobulin E (100 μg/mL; 2 d) 可诱导人主动脉平滑肌细胞产生 IFN-γ、TNF-α 和 IL-6。
Human immunoglobulin E (0.05-5 μg/mL; 4-6 d) 可强效增强分化后的人脐血来源肥大细胞表面的 FcεRI 表达及 IgE 结合能力,且浓度越高,作用效果越强。
Human immunoglobulin E (5 μg/mL; 4 d) 对分化的人脐血来源肥大细胞的 FcεRI 表面表达及 IgE 结合的增强作用远强于 rhIL-4 或人 IgG。
Human immunoglobulin E (5 μg/mL; 4 d) 可强效上调分化的人脐血来源肥大细胞表面的 FcεRI 表达,并与 rhIL-4 发挥协同作用以进一步增强 FcεRI 的表达。
Human immunoglobulin E (5 μg/mL; 12 h-8 d) 可逐步增强分化后的人脐血来源肥大细胞表面的 FcεRI 表达,且在所有测试时间点,其与 rhIL-4 协同作用诱导的 FcεRI 表达水平均高于单独使用 IgE 时的水平。
Human immunoglobulin E (0.05-5 μg/mL; 4 d) 可通过上调 FcεRI 表达,增强抗 IgE 诱导的分化后人类脐血来源肥大细胞中组胺与 LTC4 的释放,且对非 FcεRI 依赖的介质释放无影响。
Human immunoglobulin E (5 μg/mL; 4 d) 可增强分化的人脐血来源肥大细胞表面 FcεRI 的表达,以及抗 IgE 诱导的组胺、LTC4 和 PGD2 释放;与 rhIL-4 联用时可观察到协同效应。

Apoptosis Analysis

Cell Line: human monocyte-derived macrophages
Concentration: 50 μg/mL (apoptosis/cell death assay); 50 μg/mL (pH measurement); 20 μM (ZVAD-FMK co-treatment); 10 μM (EIPA co-treatment)
Incubation Time: 3 days (apoptosis/cell death assay); 1-4 days (pH measurement); 3 days (ZVAD-FMK co-treatment); 3 days (EIPA co-treatment)
Result: Induced apoptosis in ~25% of human macrophages.
Had its apoptosis-inducing effect blocked by 20 μM ZVAD-FMK.
Caused cell death in 40-80% of macrophages across 4 donors.
Had its cell death-inducing effect significantly reduced by 10 μM EIPA.
Reduced extracellular medium pH from ~7.5 to ~6.5 over 4 days.
Had its pH-reducing effect blocked by EIPA.

Western Blot Analysis

Cell Line: human aortic smooth muscle cells (HuSMCs)
Concentration: 100 μg/mL (signaling pathway assay); 100 μg/mL (BAX expression assay); 100 μg/mL (cysteine protease activation assay)
Incubation Time: 15, 30 minutes (signaling pathway assay); 3 days (BAX expression assay); 2 days (cysteine protease activation assay)
Result: Induced peak phosphorylation of p38 and JNK at 15 minutes.
Induced phosphorylation of p65 NF-κB and ERK1/2 at 15-30 minutes.
Increased BAX expression after 3 days of treatment.
Increased activities of cysteine proteases cathepsin B, S, K, and L after 2 days of treatment.
性状 液体
颜色 Colorless to light yellow

化学信息

别名 人免疫球蛋白E; Human IgE

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础