AMG-8718 是一种有效、选择性且具有口服活性的 BACE1 抑制剂,对 BACE1 和 BACE2 的 IC50 值分别为 0.0007 和 0.005 µM,并可显著降低 CSF 和大脑中的 Aβ40 水平。
产品编号: MS-F55617 CAS No.: 1215868-94-2 分子式: C25H19FN4O3 分子量: 442.44
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

AMG-8718 是一种有效、选择性且具有口服活性的 BACE1 抑制剂,对 BACE1 和 BACE2 的 IC50 值分别为 0.0007 和 0.005 µM,并可显著降低 CSF 和大脑中的 Aβ40 水平。

生物实验数据

生物活性 AMG-8718 is a potent, selective, and orally active BACE1 inhibitor with IC50 values of 0.0007 and 0.005 µM for BACE1 and BACE2, respectively, and significantly reduces Aβ40 levels in CSF and the brain.
IC50 & Target BACE1:0.0007 μM, BACE2:0.005 μM
体外研究
(In Vitro)

AMG-8718 (compound 42) shows good stability in human and rat liver microsomes, hERG binding activity with an Ki value of >10 µM.

体内研究
(In Vivo)

AMG-8718 (compound 42) (10 mg/kg; p.o.)shows significantly decreases Aβ40 levels in the CSF and brain.
AMG-8718 (i.v. for 2 mg/kg or p.o. for 5 mg/kg) shows good bioavailability of 70%, 96%,101% for rats, beagle dog, monkey, respectively.
AMG-8718 (30 mg/kg for; p.o.) dose-dependent decreases in both CSF and brain Aβ levels at 4 h time points with 50% Aβ reduction (EC50) values of 18 and 67 nM for CSF and brain respectively in rats.
AMG-8718 (2.5, 8, 16 mg/kg; i.v.; a series of three 30 min infusions) shows high unbound plasma concentrations with 0.298, 1.70, 3.62 µM at the end of each infusion in chloralose-anesthetized dogs.
Pharmacokinetic Parameters ofAMG-8718 in rats, beagle dog, cynomolgus monkey.

species Cl (L/h/kg) Vdss(L/kg) t1/2(h) Cmax (µM) tmax(h) % F plasma protein binding (Fu)
i.v. p.o.
rat 0.33 1.1 4.8 3.8 1.7 70 0.013
beagle dog 0.26 1.6 5.2 8.1 1.0 96 0.038
monkey 0.61 2.2 7.7 6.1 1.7 101 0.054
2 mg/kg i.v.; rats (DMSO), dog (1% Tween80/2% HMPC/97% water at pH = 4), cynomolgus monkey (25% HBC/75% water at pH = 4); 5 mg/kg p.o. (1% Tween80/2% HMPC/97% water at pH = 2).

Animal Model: Male Sprague-Dawley rats
Dosage: 10 mg/kg
Administration: Oral gavage
Result: Significantly decreased Aβ40 levels in the CSF at the 4 h time point at 69%, produced a robust response in the brain with 48% reduction of Aβ40 levels.
Animal Model: Rats, beagle dog, monkey
Dosage: 2, 5 mg/kg
Administration: I.v. for 2 mg/kg or p.o. for 5 mg/kg
Result: Showed moderate total clearance, moderate Vdss, and half-lives of ca. 5-8 h across all three species, and bioavailability was high (70–101%).
Animal Model: Rats
Dosage: 30 mg/kg
Administration: P.o.
Result: Demonstrated dose-dependent decreases in both CSF and brain Aβ levels at 4 h and 8 h time points.

化学信息

分子量 442.44
分子式 C25H19FN4O3
CAS No. 1215868-94-2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础