Apoptosis inducer 45

Apoptosis inducer 45 是一种凋亡 (apoptosis) 诱导剂,对 MCF-7 细胞系具有细胞毒活性,它通过激活 caspase-9 的裂解进而诱导 DNA 修复蛋白 PARP 的片段化,经线粒体途径(增加 Bax/Bcl-2 比率)引发 MCF-7 细胞凋亡,同时还可诱导 caspase-8 的裂解,随后启动 caspase-3 及其下游蛋白 PARP 的裂解,最终导致外源性细胞凋亡,因此可用于研究乳腺癌。
Apoptosis inducer 45
产品编号: MS-F21428 分子式: C41H57N3O3 分子量: 639.91
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Apoptosis inducer 45 是一种凋亡 (apoptosis) 诱导剂,对 MCF-7 细胞系具有细胞毒活性,它通过激活 caspase-9 的裂解进而诱导 DNA 修复蛋白 PARP 的片段化,经线粒体途径(增加 Bax/Bcl-2 比率)引发 MCF-7 细胞凋亡,同时还可诱导 caspase-8 的裂解,随后启动 caspase-3 及其下游蛋白 PARP 的裂解,最终导致外源性细胞凋亡,因此可用于研究乳腺癌。

生物实验数据

生物活性 Apoptosis inducer 45 is an apoptosis inducer that exhibits cytotoxic activity against the MCF-7 cell line; it induces MCF-7 cell apoptosis through the mitochondrial pathway (by increasing the Bax/Bcl-2 ratio) via activation of caspase-9 cleavage, which in turn induces fragmentation of the DNA repair protein PARP, and it can also induce caspase-8 cleavage, subsequently initiating cleavage of caspase-3 and its downstream protein PARP, ultimately leading to extrinsic apoptosis, making it useful for breast cancer research.
IC50 & Target

Caspase 3

 

Caspase 9

 

Caspase 8

 

PARP

 

Bax

 

Bcl-2

 

体外研究
(In Vitro)

Apoptosis inducer 45 (Compound 11s) 抑制细胞增殖,对 A549、MCF-7、HL-7702 和 MDA-MB-231 细胞的 IC50 值分别为 3.56、4.93、7.76 和 13.35 μM。
Apoptosis inducer 45 (2.5-10 μM, 24 h) 通过外源性和内源性途径诱导 MCF-7 细胞凋亡。
Apoptosis inducer 45 (2.5-10 μM, 24 h-14 d) 对 MCF-7 细胞生长表现出浓度和时间依赖性的抑制作用,并抑制集落形成。
Apoptosis inducer 45 (2.5-10 μM, 72 h) 显著降低 MCF-7 细胞的迁移能力。

Apoptosis Analysis

Cell Line: MCF-7 cells
Concentration: 2.5, 5 and 10 μM
Incubation Time: 24 h
Result: led to the typical apoptotic morphological characteristics of MCF-7 cells.
Increased apoptosis rates as the concentration rises.

Cell Migration Assay

Cell Line: MCF-7 cells
Concentration: 2.5, 5 and 10 μM
Incubation Time: 72 h
Result: Significantly reduced the migration ability, and the migration inhibition effect persisted for 72 hours of observation.

化学信息

分子量 639.91
分子式 C41H57N3O3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础