Isofistularin-3

Isofistularin-3((+)-11-epi-Fistularin 3)是一种直接的 DNA 竞争性 DNMT1 抑制剂(IC50 为 13.5 μM),作为 DNA 去甲基化剂可诱导肿瘤细胞周期阻滞和 TRAIL 致敏,并可作为抗体偶联活性分子(ADC)的毒素部分。
Isofistularin-3
产品编号: MS-E17701 分子式: C31H30Br6N4O11 分子量: 1114.01
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Isofistularin-3((+)-11-epi-Fistularin 3)是一种直接的 DNA 竞争性 DNMT1 抑制剂(IC50 为 13.5 μM),作为 DNA 去甲基化剂可诱导肿瘤细胞周期阻滞和 TRAIL 致敏,并可作为抗体偶联活性分子(ADC)的毒素部分。

生物实验数据

生物活性 Isofistularin-3 ((+)-11-epi-Fistularin 3) is a direct DNA-competitive DNMT1 inhibitor with an IC50 of 13.5 μM that, as a DNA demethylating agent, induces tumor cell cycle arrest and TRAIL sensitization, and can serve as the toxin payload of an antibody-drug conjugate (ADC).
IC50 & Target

DNMT1

13.5 μM (IC50)

Traditional Cytotoxic Agents

 

体外研究
(In Vitro)

Isofistularin-3 (1-50 μM; 24-72 hours) shows a marked reduction of cell proliferation.
Isofistularin-3 (5-50 μM; 24 hours) increases arrests cancer cells in G0/G1 cell cycle phase.
Isofistularin-3 (25 μM; 72 hours) increases AHR expression. Isofistularin-3 induces AHR promoter demethylation. Isofistularin-3 (72 hours) inhibits a broader panel of cancer cell lines proliferation, with the GI50s ranging from 7.3-14.8 μM. Isofistularin-3 induces morphological changes and autophagy in RAJI cells. Isofistularin-3 induces caspase-dependent and -independent cell death. Isofistularin-3 sensitizes lymphoma cells to TRAIL-induced apoptosis.

Cell Proliferation Assay

Cell Line: RAJI and U-937 lymphoma cells
Concentration: 1, 5, 15, 25, 50 μM
Incubation Time: 24 and 72 hours
Result: A marked reduction of cell proliferation.

Cell Cycle Analysis

Cell Line: RAJI and U-937 cells
Concentration: 5, 50 μM
Incubation Time: 24 hours
Result: An arrest in the G0/G1 phase of the cell cycle for both cell lines.

RT-PCR

Cell Line: RAJI cells
Concentration: 25 μM
Incubation Time: 72 h
Result: AHR mRNA expression level was 5.1 times higher.

化学信息

分子量 1114.01
分子式 C31H30Br6N4O11

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础