Ralinepag

Synonyms: APD811
Ralinepag 是一种有效的、可口服的非前列腺素类 prostacyclin (IP) receptor 激动剂,对人和大鼠 IP 受体的 EC50 值分别为 8.5 nM 和 530 nM,对人 DP1 受体的 EC50 值为 850 nM。
产品编号: MS-E05839 纯度: 99.27% CAS No.: 1187856-49-0 分子式: C23H26ClNO5 分子量: 431.91
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价
1g
询价
询价

产品描述

Ralinepag 是一种有效的、可口服的非前列腺素类 prostacyclin (IP) receptor 激动剂,对人和大鼠 IP 受体的 EC50 值分别为 8.5 nM 和 530 nM,对人 DP1 受体的 EC50 值为 850 nM。

生物实验数据

生物活性 Ralinepag is a potent, orally available, non-prostanoid prostacyclin (IP) receptor agonist with EC50 values of 8.5 nM and 530 nM for human and rat IP receptors, respectively, and an EC50 value of 850 nM for the human DP1 receptor.
IC50 & Target IP (human):8.5 nM(EC50), IP (rat):530 nM(EC50), DP1 (human):850 nM(EC50)
体外研究
(In Vitro)

Ralinepag is a potent non-prostanoid prostacyclin receptor agonist, with EC50s of 8.5 nM, 530 nM and 850 nM for human and rat IP receptor and human DP1 receptor, respectively. Ralinepag (5c) has potent receptor binding affinity at prostaglandin receptor, with Kis of 1.2 nM, 3 nM, 76 nM, and 256 nM for monkey, human, rat, and dog IP receptor (ligand, [3H]-iloprost), and 2.6 μM, 9.6 μM, 610 nM, 143 nM, and 678 nM for human DP1, EP1, EP2, EP3v6 and EP4 receptors (ligand, [3H]-PGE2), respectively. Moreover, Ralinepag shows no effect on cytochrome P450 enzymes (IC50 > 50 μM for CYPs 1A2, 2D6, 3A4 2C8, 2C9, and 2C19) or hERG channel functional activity in a patch clamp assay (IC50 > 30 μM). Ralinepag also inhibits the ADP-induced human platelet aggregation, with an IC50 of 38 nM.

体内研究
(In Vivo)

Ralinepag (30 mg/kg, p.o.) markedly reduces the monocrotaline (MCT)-induced increase in pulmonary arterial pressure and pulmonary vessel wall thickness in rats.

性状 固体
颜色 White to off-white

化学信息

分子量 431.91
分子式 C23H26ClNO5
CAS No. 1187856-49-0
别名 APD811

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2.00 mg/mL (4.63 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : ≥ 100 mg/mL (231.53 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.3153 mL11.5765 mL23.1530 mL57.8824 mL
5 mM0.4631 mL2.3153 mL4.6306 mL11.5765 mL
10 mM0.2315 mL1.1576 mL2.3153 mL5.7882 mL
15 mM0.1544 mL0.7718 mL1.5435 mL3.8588 mL
20 mM0.1158 mL0.5788 mL1.1576 mL2.8941 mL
25 mM0.0926 mL0.4631 mL0.9261 mL2.3153 mL
30 mM0.0772 mL0.3859 mL0.7718 mL1.9294 mL
40 mM0.0579 mL0.2894 mL0.5788 mL1.4471 mL
50 mM0.0463 mL0.2315 mL0.4631 mL1.1576 mL
60 mM0.0386 mL0.1929 mL0.3859 mL0.9647 mL
80 mM0.0289 mL0.1447 mL0.2894 mL0.7235 mL
100 mM0.0232 mL0.1158 mL0.2315 mL0.5788 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 2 years; -20°C, 1 year。-80°C储存时,请在2年内使用, -20°C储存时,请在1年内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础