HEMTAC CDK4/6 degrader 1

HEMTAC CDK4/6 degrader 1 是一种由 HSP90 配体与 CDK4/6 连接而成的 PROTAC,其 Kd 值为 35.7 μM,可在 B16F10 黑色素瘤细胞中诱导 CDK4/6 降解,将细胞周期阻滞于 G0/G1 期并诱导细胞凋亡,因此可用于癌症研究。
产品编号: MS-D56588 纯度: 98.18% CAS No.: 2821803-61-4 分子式: C48H53ClN16O4 分子量: 953.49
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

HEMTAC CDK4/6 degrader 1 是一种由 HSP90 配体与 CDK4/6 连接而成的 PROTAC,其 Kd 值为 35.7 μM,可在 B16F10 黑色素瘤细胞中诱导 CDK4/6 降解,将细胞周期阻滞于 G0/G1 期并诱导细胞凋亡,因此可用于癌症研究。

生物实验数据

生物活性 HEMTAC CDK4/6 degrader 1 is a PROTAC linking an HSP90 ligand to CDK4/6 with a Kd value of 35.7 μM, which induces CDK4/6 degradation in B16F10 melanoma cells, arrests the cell cycle at the G0/G1 phase, and induces apoptosis, making it applicable for cancer research.
IC50 & Target

CDK4

 

CDK6

 

Hsp90TACs

 

体外研究
(In Vitro)

HEMTAC CDK4/6 degrader 1 (compound 26; 0.01-1 μM; 24 h) induces CDK4 and CDK6 degradation in the treated B16F10 cells with a DC50 value (the drug concentration that results in 50% protein degradation) of approximately 26 and 19 nM and a Dmax (maximal percent degradation) of 88 and 92%, respectively.
HEMTAC CDK4/6 degrader 1 (0.01-100 μM; 72 h) has anti-proliferative activity against a broad range of human cancer cell lines.
HEMTAC CDK4/6 degrader 1 (250 nM; 24 or 48 h) induces B16F10 cells to undergo apoptosis in a dose-dependent manner and arrests cell cycle at G0/G1 phase.

Cell Viability Assay

Cell Line: B16F10, A375, HepG2, MDA-MB-231, and A549 cells
Concentration: 0.01-100 μM
Incubation Time: 72 hours
Result: Inhibited cell growth in a dose-dependent manner.

Apoptosis Analysis

Cell Line: B16F10 cells
Concentration: 250 nM
Incubation Time: 48 hours
Result: Induced cell apoptosis in a dose-dependent manner.

Cell Cycle Analysis

Cell Line: B16F10 cells
Concentration: 250 nM
Incubation Time: 48 hours
Result: Increased the amount of B16F10 cells in the G0/G1 phase.

Western Blot Analysis

Cell Line: B16F10 cells
Concentration: 0.01, 0.05, 0.1, 0.5, and 1 μM
Incubation Time: 24 hours
Result: Induced CDK4/6 degradation in a dose-dependent manner.
体内研究
(In Vivo)

HEMTAC CDK4/6 degrader 1 (compound 26; 20 and 40 mg/kg; i.p.; daily, for 15 d) has antitumor efficacy in C57BL/6J mice bearing B16F10 melanoma xenografts.

Animal Model: C57BL/6J mice bearing B16F10 melanoma xenografts
Dosage: 20 and 40 mg/kg
Administration: intraperitoneal injection; daily, for 15 days
Result: Inhibited tumor growth and resulted in fewer CDK4/6-positive cells and led to much more necrosis.
性状 固体
颜色 Light yellow to green yellow

化学信息

分子量 953.49
分子式 C48H53ClN16O4
CAS No. 2821803-61-4

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础