XMU-MP-8

Synonyms: SKPer1
XMU-MP-8 (SKPer1) 是一种靶向癌蛋白 SKP2 的高效分子胶 (molecular glue) 降解剂,它同时与 SKP2 的 F-box 结构域 (Kd ≈ 36 μM) 和 E3 连接酶 STUB1 的 N 端 TPR 结构域 (Kd ≈ 2.5 μM) 结合,形成稳定的 SKP2-SKPer1-STUB1 三元复合物 (Kd ≈ 8.9 nM),从而诱导 SKP2 泛素化和蛋白酶体降解,能够选择性清除 SKP2 表达的癌细胞,在体内表现出显著的肿瘤抑制效果和良好的安全性,可用于非小细胞肺腺癌 (NSCLC) 和前列腺癌等癌症的相关研究。
产品编号: MS-D53126 纯度: 99.23% CAS No.: 2271314-01-1 分子式: C26H21F3N8S 分子量: 534.56
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价

产品描述

XMU-MP-8 (SKPer1) 是一种靶向癌蛋白 SKP2 的高效分子胶 (molecular glue) 降解剂,它同时与 SKP2 的 F-box 结构域 (Kd ≈ 36 μM) 和 E3 连接酶 STUB1 的 N 端 TPR 结构域 (Kd ≈ 2.5 μM) 结合,形成稳定的 SKP2-SKPer1-STUB1 三元复合物 (Kd ≈ 8.9 nM),从而诱导 SKP2 泛素化和蛋白酶体降解,能够选择性清除 SKP2 表达的癌细胞,在体内表现出显著的肿瘤抑制效果和良好的安全性,可用于非小细胞肺腺癌 (NSCLC) 和前列腺癌等癌症的相关研究。

生物实验数据

生物活性 XMU-MP-8 (SKPer1) is a highly potent molecular glue degrader targeting the oncoprotein SKP2 that binds simultaneously to the F-box domain of SKP2 (Kd ≈ 36 μM) and the N-terminal TPR domain of the E3 ligase STUB1 (Kd ≈ 2.5 μM) to form a stable SKP2-SKPer1-STUB1 ternary complex (Kd ≈ 8.9 nM), thereby inducing SKP2 ubiquitination and proteasomal degradation, selectively eliminating SKP2-expressing cancer cells, and demonstrating significant tumor suppression efficacy and a favorable safety profile in vivo, making it applicable for research on cancers such as non-small cell lung adenocarcinoma (NSCLC) and prostate cancer.
IC50 & Target SKP2:36 μM (Kd)
体外研究
(In Vitro)

XMU-MP-8 (10 μM,24 小时) 特异性地在 SKP2-F-C 细胞系中产生细胞存活表型,而在其他 F-C 细胞系中未观察到细胞存活,这排除了其普遍干扰 F-C 死亡蛋白激活的可能性。
XMU-MP-8 (1-10 μM,0-24 小时) 可触发 SKP2 泛素化和蛋白酶体降解,显著缩短其半衰期并消耗内源性 SKP2 蛋白,但不影响其 mRNA 水平。
XMU-MP-8 (72 小时) 抑制 SKP2 高表达癌细胞的增殖,其对 PC-3、A549、JHH-7、SW620、LoVo、RKO、Caco2 和 HeLa 细胞的 IC50 值分别为 3.7 μM、6.7 μM、3.7 μM、6.2 μM、4.5 μM、6.9 μM、5.6 μM 和 5.3 μM。
XMU-MP-8 (10 μM,72 小时) 能完全阻断 SKP2 高表达细胞系的增殖,并诱导其大量细胞死亡。
XMU-MP-8 (10 μM,24 小时) 在 SKP2 高表达细胞系 (JHH-7 和 PC-3) 中诱导 SKP2 蛋白降解和 p27 蛋白积累,而在 SKP2 低表达细胞系 (IMR-90 和 MCF-10A) 中未引起显著变化。
XMU-MP-8 (2.5-10 μM,0-5 天) 对正常小鼠肠道类器官和人外周血单核细胞的生长无显著影响。
XMU-MP-8 (10 μM,2.5 小时) 通过将 E3 连接酶 STUB1 募集到 SKP2 的 F-box 结构域,形成三元复合物,使 SKP2-STUB1 相互作用增强 122 倍,最终导致 SKP2 泛素化与降解。

Western Blot Analysis

Cell Line: JHH-7 and HeLa cells
Concentration: 1, 2, 5, and 10 μM
Incubation Time: 0, 2, 4, 6, 8, 12 and 24 h
Result: Reduced SKP2 levels in JHH-7 and HeLa cells in a dose- and time-dependent manner.
Degraded SKP2 through the proteasome, but not the lysosome.
Induced ubiquitination of SKP2.
Significantly reduced the SKP2 half-life of SKP2 (from 10.8 h to 3.3 h in JHH-7 cells, and from 11.3 h to 6.2 h in HeLa cells).

Western Blot Analysis

Cell Line: A549 and PC-3 cells and derived genetically modified lines.
Concentration: 5 and 10 μM
Incubation Time: 2.5 and 24 h
Result: Failed to degrade SKP2-F-C when three lysine residues (3K>R) in its F-box domain were mutated.
Failed to induce ubiquitination of the SKP2 3K>R mutant protein.
Was unable to exert its anti-proliferative effect in cells where endogenous SKP2 had been replaced with the degradation-resistant 3K>R mutant.
Failed to induce SKP2 ubiquitination and degradation in STUB1 knockout cells.
Re-gained its ability to degrade SKP2 following the reconstitution of sgRNA-resistant STUB1 in STUB1 knockout cells.
Still recruited the 3K>R mutant to STUB1, even though this mutant was resistant to degradation.
体内研究
(In Vivo)

XMU-MP-8 (15 和 30 mg/kg,静脉注射,每日一次,持续 14 天) 通过降解 SKP2 在 A549 和 PC-3 异种移植小鼠模型中展现出显著的抗肿瘤功效。
XMU-MP-8 (30 mg/kg,静脉注射,每日一次,持续 14 天) 在 BALB/c 裸鼠体内未表现出不良反应。

Animal Model: Male BALB/c nude mice (6 weeks old)
Dosage: 30 mg/kg
Administration: i.v., daily for 14 days
Result: Exhibited no significant changes in body weight and liver function (ALT/AST levels).
Showed no histopathological damage in the heart, kidney, liver, lung, or spleen.
Animal Model: Male BALB/c nude mice (6 weeks old) subcutaneously injected with A549 or PC-3 cells
Dosage: 15 and 30 mg/kg
Administration: i.v., daily for 14 days
Result: Completely ceased the growth of A549 tumors.
Caused a 95 % reduction in tumour growth in PC-3 xenograft model.
Caused depletion of SKP2 and an increase of p27 in the xenograft PC-3 tumour.
性状 固体
颜色 White to off-white

化学信息

分子量 534.56
分子式 C26H21F3N8S
CAS No. 2271314-01-1
别名 SKPer1

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 116.67 mg/mL (218.25 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.8707 mL9.3535 mL18.7070 mL46.7674 mL
5 mM0.3741 mL1.8707 mL3.7414 mL9.3535 mL
10 mM0.1871 mL0.9353 mL1.8707 mL4.6767 mL
15 mM0.1247 mL0.6236 mL1.2471 mL3.1178 mL
20 mM0.0935 mL0.4677 mL0.9353 mL2.3384 mL
25 mM0.0748 mL0.3741 mL0.7483 mL1.8707 mL
30 mM0.0624 mL0.3118 mL0.6236 mL1.5589 mL
40 mM0.0468 mL0.2338 mL0.4677 mL1.1692 mL
50 mM0.0374 mL0.1871 mL0.3741 mL0.9353 mL
60 mM0.0312 mL0.1559 mL0.3118 mL0.7795 mL
80 mM0.0234 mL0.1169 mL0.2338 mL0.5846 mL
100 mM0.0187 mL0.0935 mL0.1871 mL0.4677 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础