AA 193 是一种口服有效的促尿酸排泄剂,可抑制肾单位内尿酸的净重吸收并调控滤过尿酸的肾重吸收过程,呈剂量依赖性促进尿酸排泄、降低血尿酸水平,同时轻度抑制黄嘌呤脱氢酶 (XDH) 活性,可用于高尿酸血症的相关研究。
产品编号: MS-D29516 CAS No.: 107804-48-8 分子式: C16H10ClNO4 分子量: 315.71
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

AA 193 是一种口服有效的促尿酸排泄剂,可抑制肾单位内尿酸的净重吸收并调控滤过尿酸的肾重吸收过程,呈剂量依赖性促进尿酸排泄、降低血尿酸水平,同时轻度抑制黄嘌呤脱氢酶 (XDH) 活性,可用于高尿酸血症的相关研究。

生物实验数据

生物活性 AA 193 is an orally effective uricosuric agent that inhibits the net reabsorption of uric acid in the nephron and regulates the renal reabsorption of filtered uric acid, promoting uric acid excretion and lowering blood uric acid levels in a dose-dependent manner, while mildly inhibiting xanthine dehydrogenase (XDH) activity, and can be used for research related to hyperuricemia.
体外研究
(In Vitro)

AA 193 (1 mM; 20 min) 对大鼠肝匀浆溶酶体组分中的尿酸酶活性无影响。
AA 193 (0.2-1 mM; 20 min) 在 0.2 mM 浓度下对大鼠肝匀浆胞质组分中的黄嘌呤脱氢酶活性无影响,而 1 mM 的 AA-193 可轻度抑制该酶活性。

体内研究
(In Vivo)

AA-193 (20-100 mg/kg;口服;每日一次;连续 7 天) 在正常大鼠中连续 7 天每日口服给药后,仍保持剂量依赖性的促尿酸排泄活性,且不改变血浆尿酸水平。
AA-193 (20-100 mg/kg;口服;每日一次;连续 7 天) 在高尿酸血症大鼠中发挥剂量依赖性降尿酸活性。

Animal Model: Wistar-Immamichi (8-week-old male, normal, fed standard diet pellet CE-2)
Dosage: 20 mg/kg; 50 mg/kg; 100 mg/kg
Administration: p.o.; daily; 7 days
Result: Increased 24-hour urate excretion by 16.9% (20 mg/kg), 24.4% (50 mg/kg), and 25.0% (100 mg/kg) compared to vehicle control after first administration.
Maintained dose-dependent uricosuric activity over 7 consecutive administrations.
Did not significantly alter plasma urate concentrations throughout the study.
Increased plasma allantoin by 11.4% in the 100 mg/kg group on day 7, while urinary and plasma allantoin levels were largely unchanged otherwise.
Increased fractional excretion of urate at 50 mg/kg, with peak responses occurring 2 hours after administration, correlating with plasma AA-193 concentrations (57.1 μg/mL at 2 hours, 21.1 μg/mL at 8 hours on day 1, undetectable by 24 hours).
Showed similar plasma AA-193 concentration time course on day 1 and day 7.
Animal Model: Wistar-Immamichi (8-week-old male, hyperuricemic, fed standard diet pellet CE-2 blended with 2.5% oxonate potassium salt for days 1 to 8)
Dosage: 20 mg/kg; 50 mg/kg; 100 mg/kg
Administration: p.o.; daily; 7 days
Result: Increased urate excretion rate at all doses.
Caused a dose-dependent decrease in plasma urate levels, with a significant 18.2% reduction in the 100 mg/kg group on day 7 compared to vehicle control.
Left plasma and urinary allantoin levels unchanged.
Increased fractional excretion of urate at 50 mg/kg, mirroring the relationship seen in normal rats.
Resulted in plasma urate levels and urate excretion rates 6 to 10 times higher than in normal rats, while fractional excretion of urate and inulin clearance values were comparable to normal rats.

化学信息

分子量 315.71
分子式 C16H10ClNO4
CAS No. 107804-48-8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础