KD014

Synonyms: DX-2400; DX-2410
KD014 (DX-2400) 是一种选择性靶向 MMP-14 的人源单克隆抗体,可抑制胶原降解、调控巨噬细胞向抗炎/抗肿瘤表型极化,并能缓解类风湿关节炎关节损伤、抑制肿瘤生长侵袭,可用于乳腺癌、类风湿关节炎的相关研究。
KD014
产品编号: MS-C83449 纯度: 96.98% 分子量: 144.01 kDa
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价

产品描述

KD014 (DX-2400) 是一种选择性靶向 MMP-14 的人源单克隆抗体,可抑制胶原降解、调控巨噬细胞向抗炎/抗肿瘤表型极化,并能缓解类风湿关节炎关节损伤、抑制肿瘤生长侵袭,可用于乳腺癌、类风湿关节炎的相关研究。

生物实验数据

生物活性 KD014 (DX-2400) is a human monoclonal antibody that selectively targets MMP-14, inhibits collagen degradation, modulates macrophage polarization toward an anti-inflammatory/anti-tumor phenotype, alleviates joint damage in rheumatoid arthritis, suppresses tumor growth and invasion, and can be used for research on breast cancer and rheumatoid arthritis.
IC50 & Target

MMP14

0.9 nM (Ki)

体外研究
(In Vitro)

KD014 (0.1-50 μg/mL; 3 days) 对 4T1 或 E0771 小鼠乳腺癌细胞的活力无影响。
KD014 (0.2-100 μg/mL) 以剂量依赖的方式显著抑制 4T1 小鼠乳腺癌细胞穿过 I 型胶原蛋白基质的侵袭能力。
KD014 (100-500 nM; 4 days) 可呈剂量依赖性地抑制人类风湿关节炎成纤维样滑膜细胞 (RA FLS) 对胶原膜的降解。
KD014 (100-500 nM; 4 weeks) 可呈剂量依赖性抑制人类风湿关节炎成纤维样滑膜细胞 (RA FLS) 侵袭牛鼻软骨。

Cell Invasion Assay

Cell Line: 4T1 murine breast carcinoma cells
Concentration: 0.2, 2.0, 20, 100 μg/mL
Incubation Time: /
Result: Inhibited 4T1 cell invasion through a collagen matrix in a dose-dependent manner.
Exhibited statistically significant inhibition at all tested concentrations (P =.0314 at 0.2 μg/mL to P =.0004 at 100 μg/mL).

Cell Invasion Assay

Cell Line: human rheumatoid arthritis fibroblast-like synoviocytes (RA FLS)
Concentration: 100 nM; 500 nM
Incubation Time: 4 weeks
Result: Inhibited the invasion of human RA FLS into bovine nasal cartilage explants in a dose-dependent manner, as shown by reduced presence of invading cells compared to control.
体内研究
(In Vivo)

KD014 (10 mg/kg;腹腔注射;每 48 小时 1 次;最多注射 10 次) 在 4T1 与 E0771 原位乳腺癌小鼠模型中可抑制肿瘤生长。
KD014 (20-40 mg/kg;腹腔注射;每隔 1 天给药 1 次;10 天) 在小鼠胶原诱导性关节炎模型中可显著抑制关节软骨降解、阻断关节炎进展。

Animal Model: nude mice (female, 6-8 weeks, orthotopic 4T1/E0771 breast cancer model)
Dosage: 10 mg/kg
Administration: i.p.; every 48 hours; up to 10 injections
Result: Inhibited tumor growth.
Polarized macrophages to an antitumor M1‑like phenotype, elevated iNOS expression and tumor perfusion.
Reduced hypoxia, and synergizes with radiotherapy in murine orthotopic 4T1 and E0771 breast cancer models.
Animal Model: DBA/1 (male, 11-13 weeks old, collagen-induced arthritis model)
Dosage: 20, 40 mg/kg
Administration: i.p.; every other day; 10 days
Result: Markedly reduced cartilage degradation and serum COMP levels, mitigated arthritis spread to unaffected joints, and had minimal effect on joint swelling and bone erosion.
性状 液体
颜色 Colorless to light yellow

化学信息

分子量 144.01 kDa
别名 DX-2400; DX-2410

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Shipping with dry ice.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础