4-Vinylcyclohexene dioxide

Synonyms: Vinylcyclohexene diepoxide
4-Vinylcyclohexene dioxide (4-Vinylcyclohexene diepoxide) 是口服活性的 4-vinylcyclohexene 代谢物,可诱导凋亡 (Apoptosis)、增加细胞内 ROS 并激活 PI3K/Akt/mTOR 通路,选择性损伤卵巢小卵泡、抑制颗粒细胞功能及破坏雄性生殖系统,可用于早发性卵巢功能不全、生殖毒性及相关 fertility 障碍的研究。
产品编号: MS-C74774 纯度: 98.57% CAS No.: 106-87-6 分子式: C8H12O2 分子量: 140.18
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
500mg
询价
3-5 天
1g
询价
3-5 天
5g
询价
3-5 天
10g
询价
3-5 天
25g
询价
3-5 天
50g
询价
3-5 天
100g
询价
3-5 天
> 100g
询价
询价

产品描述

4-Vinylcyclohexene dioxide (4-Vinylcyclohexene diepoxide) 是口服活性的 4-vinylcyclohexene 代谢物,可诱导凋亡 (Apoptosis)、增加细胞内 ROS 并激活 PI3K/Akt/mTOR 通路,选择性损伤卵巢小卵泡、抑制颗粒细胞功能及破坏雄性生殖系统,可用于早发性卵巢功能不全、生殖毒性及相关 fertility 障碍的研究。

生物实验数据

生物活性 4-Vinylcyclohexene dioxide (4-Vinylcyclohexene diepoxide) is an orally active metabolite of 4-vinylcyclohexene that induces apoptosis, increases intracellular ROS, activates the PI3K/Akt/mTOR pathway, selectively damages ovarian small follicles, inhibits granulosa cell function, and disrupts the male reproductive system, and can be used for research on premature ovarian insufficiency, reproductive toxicity, and related fertility disorders.
体外研究
(In Vitro)

4-Vinylcyclohexene dioxide (90 μM-3 mM;24 h) 在人卵巢颗粒细胞系 (SVOG) 中诱导凋亡,增加细胞内活性氧并抑制增殖。
4-Vinylcyclohexene dioxide (10 nM-10 mM; 6-24 h) 通过短暂激活 PI3K/Akt/mTOR 通路促进原始卵泡的激活。

Apoptosis Analysis

Cell Line: Human ovarian granulosa cell line (SVOG)
Concentration: 0.5 mM, 1 mM
Incubation Time: 24 h
Result: Increased apoptosis with higher Annexin V-positive cells.
Induced a significant increase in Hoechst 33342 and PI positive cells in a dose-dependent manner.
体内研究
(In Vivo)

4-Vinylcyclohexene dioxide (80 mg/kg;腹腔注射;每日一次,1-15 天) 通过激活雌性 F344 大鼠小腔前卵泡中的胱天蛋白酶级联反应来加速卵泡闭锁。
4-Vinylcyclohexene dioxide (80 mg/kg;腹腔注射;5-10 天) 可促进中年 C57BL/6J 小鼠超排卵,提高血清 E2 和 FSH 水平,并增强卵泡发育。
4-Vinylcyclohexene dioxide (100-500 mg/kg;口服;每日一次,共 28 天) 可破坏雄性 Wistar 大鼠睾丸和附睾中的精子特性,降低生殖激素水平,并诱导氧化应激和细胞凋亡。

Animal Model: Female F344 rats (28-day-old)
Dosage: 80 mg/kg
Administration: i.p., 1 day or 15 days
Result: Increased cytosolic caspase-3 activity in small follicles (Day 1: 2.86; Day 15: 3.25, VCD/control).
Increased procaspase-3 protein by 212% (Day 15).
Increased caspase-8 activity (Day 15).
Increased caspase-9 activity (Day 1).
性状 液体(密度:1.0986 g/cm3)
颜色 Colorless to light yellow

化学信息

分子量 140.18
分子式 C8H12O2
CAS No. 106-87-6
别名 Vinylcyclohexene diepoxide

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 5 mg/mL (35.67 mM), Sonication is recommended.
10% DMSO+90% Saline: 10 mg/mL (71.34 mM), Solution.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Pure form -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 50 mg/mL (356.68 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM7.1337 mL35.6684 mL71.3369 mL178.3421 mL
5 mM1.4267 mL7.1337 mL14.2674 mL35.6684 mL
10 mM0.7134 mL3.5668 mL7.1337 mL17.8342 mL
15 mM0.4756 mL2.3779 mL4.7558 mL11.8895 mL
20 mM0.3567 mL1.7834 mL3.5668 mL8.9171 mL
25 mM0.2853 mL1.4267 mL2.8535 mL7.1337 mL
30 mM0.2378 mL1.1889 mL2.3779 mL5.9447 mL
40 mM0.1783 mL0.8917 mL1.7834 mL4.4586 mL
50 mM0.1427 mL0.7134 mL1.4267 mL3.5668 mL
60 mM0.1189 mL0.5945 mL1.1889 mL2.9724 mL
80 mM0.0892 mL0.4459 mL0.8917 mL2.2293 mL
100 mM0.0713 mL0.3567 mL0.7134 mL1.7834 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础