Flt-3L-Ig (hum/hum)

Synonyms: human Flt3L; hFlt3L
Flt-3L-Ig (hum/hum) (hFlt3L) 是一种 Flt3 配体,可增强 OKT3 诱导的 BRGSF-CBC 小鼠髓系细胞和树突状细胞炎性细胞因子的释放,增加 OKT3 依赖的 IL-2、CCL2 和 CXCL10 的释放,并可用于细胞因子释放综合征及银屑病样皮肤炎症的相关研究。
Flt-3L-Ig (hum/hum)
产品编号: MS-C65654 纯度: 98% 分子量: 86.938 kDa
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价

产品描述

Flt-3L-Ig (hum/hum) (hFlt3L) 是一种 Flt3 配体,可增强 OKT3 诱导的 BRGSF-CBC 小鼠髓系细胞和树突状细胞炎性细胞因子的释放,增加 OKT3 依赖的 IL-2、CCL2 和 CXCL10 的释放,并可用于细胞因子释放综合征及银屑病样皮肤炎症的相关研究。

生物实验数据

生物活性 Flt-3L-Ig (hum/hum) (hFlt3L) is a Flt3 ligand that enhances OKT3-induced inflammatory cytokine release from myeloid cells and dendritic cells in BRGSF-CBC mice, increases OKT3-dependent release of IL-2, CCL2, and CXCL10, and can be used for research on cytokine release syndrome and psoriasis-like skin inflammation.
IC50 & Target

IL-2

 

体内研究
(In Vivo)

Flt-3L-Ig (hum/hum) (每次注射 10 μg;腹腔注射;每 2-3 天注射,4 次) 可扩增 BRGSF-CBC 小鼠体内的人源髓系细胞和树突状细胞亚群,显著增强 OKT3 诱导的细胞因子释放、体重下降、体温降低、免疫细胞耗竭及免疫细胞活化等多种 CRS 特征。
Flt-3L-Ig (hum/hum) (10 μg;腹腔注射;分别于第 0、2、4 和 7 天给) 可增加 BRGSF-HIS 小鼠体内的免疫细胞群体。

Animal Model: BRGSF mice (female, 21-22 weeks old, humanized with umbilical cord blood CD34+ cells)
Dosage: 10 μg per injection
Administration: i.p.; four times on days 0, 2, 4, and 7 (every 2-3 days)
Result: Increased OKT3-induced serum levels of IL-2, CCL2, and CXCL10.
Enhanced OKT3-induced body weight loss, reaching a 13-15% reduction from baseline at 48h post-OKT3.
Induced a significant temperature drop, a ~4-6% reduction from baseline at 24h post-OKT3, an effect not seen in non-boosted mice.
Amplified OKT3-induced depletion of plasmacytoid dendritic cells (pDCs), conventional dendritic cells (cDCs), and monocytes/macrophages.
Enhanced OKT3-induced activation of pDCs, cDCs, and neutrophils, measured by increased percentages of CD86+, CD80+, and CD86+/CD80+ cells in these populations.
Increased absolute and relative numbers of human monocytes/macrophages, pDCs, and cDCs in bone marrow, spleen, and systemic circulation without inducing significant immune cell activation.\nEnabled detection of Blinatumomab-induced CRS features, including significant increases in serum levels of human TNF-α, IL-6, IFN-γ, CCL2, and CXCL10, and a sustained, significant reduction in body temperature at the 5 μg/kg Blinatumomab dose.\nEnabled detection of JNJ-induced CRS features, including dose-dependent increases in serum levels of human CCL5, CCL2, CXCL8, TNF-α, IL-1RA, and IL-10.
Caused significant depletion of monocytes/macrophages and cDCs at 48h post-JNJ injection.
Induced significant increases in the percentage of CD86+ activated monocytes/macrophages and cDCs at 24h post-JNJ injection (at the 20 mg/kg JNJ dose).
性状 液体
颜色 Colorless to light yellow

化学信息

分子量 86.938 kDa
别名 human Flt3L; hFlt3L

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Shipping with dry ice.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础