RET-IN-32 是一种具有口服活性的 RET 抑制剂,对野生型及 V804M、G810S 突变型的 IC50 分别为 0.285、4.602 和 103.5 nM,可抑制 Tyr1062 的自磷酸化,完全抑制 BAF3-KIF3B-RET-WT 异种移植物诱导的肿瘤生长,并可用于甲状腺癌和肺癌的研究。
产品编号: MS-B02389 CAS No.: 2620629-32-3 分子式: C33H35N7O4 分子量: 593.68
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

RET-IN-32 是一种具有口服活性的 RET 抑制剂,对野生型及 V804M、G810S 突变型的 IC50 分别为 0.285、4.602 和 103.5 nM,可抑制 Tyr1062 的自磷酸化,完全抑制 BAF3-KIF3B-RET-WT 异种移植物诱导的肿瘤生长,并可用于甲状腺癌和肺癌的研究。

生物实验数据

生物活性 RET-IN-32 is an orally active RET inhibitor with IC50 values of 0.285, 4.602, and 103.5 nM against wild-type and V804M and G810S mutants, respectively, inhibits Tyr1062 autophosphorylation, completely suppresses tumor growth induced by BAF3-KIF3B-RET-WT xenografts, and can be used for research on thyroid cancer and lung cancer.
体外研究
(In Vitro)

RET-IN-32 (Compound 9) (72 h) 可抑制 BAF3-KIF5B-RET-WT 细胞的增殖,其 IC50 为 1.2 nM;同时可抑制 BAF3-KIF5B-RETV804M 细胞的增殖,其 IC50 为 212 nM。
RET-IN-32 (1-100 nM; 12 h) 可在 BAF3-KIF5B-RET-WT 细胞中呈剂量依赖性降低 SPRY4 和 DUSP6 的 mRNA 表达,但对 GSK3B 的 mRNA 表达无影响。
RET-IN-32 (1-1000 nM; 1 h) 可在 10 nM 浓度下显著抑制 BAF3-KIF5B-RET-WT 细胞中 RET Tyr1062 的自磷酸化,在 100 nM 浓度下则几乎实现完全抑制。
RET-IN-32 (1-1000 nM; 12 h) 可在 BAF3-KIF5B-RET-WT 细胞中诱导剂量依赖性 G0/G1 期阻滞并减少 S 期细胞群。
RET-IN-32 (10-1000 nM; 12 h) 可在 100 nM 和 1000 nM 浓度下诱导 BAF3-KIF5B-RET-WT 细胞发生细胞凋亡。

Real Time qPCR

Cell Line: BAF3-KIF5B-RET-WT cells
Concentration: 1, 10 and 100 nM
Incubation Time: 12 h
Result: Exhibited dose-dependent inhibition of SPRY4 and DUSP6 mRNA expression.
Had no effect on GSK3B mRNA expression.

Western Blot Analysis

Cell Line: BAF3-KIF5B-RET-WT cells
Concentration: 1, 10, 100 and 1000 nM
Incubation Time: 1 h
Result: Significantly inhibited RET autophosphorylation on Tyr1062 at 10 nM.
Nearly completely inhibited RET autophosphorylation at 100 nM.

Cell Cycle Analysis

Cell Line: BAF3-KIF5B-RET-WT cells
Concentration: 1, 10, 100 and 1000 nM
Incubation Time: 12 h
Result: Induced dose-dependent G0/G1 phase arrest in BAF3-KIF5B-RET-WT cells.
Inhibited S phase progression in BAF3-KIF5B-RET-WT cells.

Apoptosis Analysis

Cell Line: BAF3-KIF5B-RET-WT cells
Concentration: 1, 10, 100 and 1000 nM
Incubation Time: 12 h
Result: Increased the fraction of apoptotic cells in BAF3-KIF5B-RET-WT cells at 100 nM dose compared to the blank control group.
Increased the fraction of apoptotic cells in BAF3-KIF5B-RET-WT cells at 1000 nM dose compared to the blank control group.
体内研究
(In Vivo)

RET-IN-32 (Compound 9) (1-10 mg/kg;灌胃;每日 2 次;连续 15 天) 在 BAF3-KIF3B-RET-WT 异种移植模型中展现出强效的、剂量依赖性抗肿瘤功效。

Animal Model: Balb/c nude (male, 4-6 weeks old, 18-20 g, subcutaneous xenograft model)
Dosage: 1 mg/kg; 3 mg/kg; 10 mg/kg
Administration: i.g.; twice daily; 15 days
Result: Produced significant dose-dependent reductions in tumor weight compared to vehicle control.
Achieved complete tumor growth inhibition at 10 mg/kg dose.
Caused no mortality or body weight changes in any treatment group throughout the 15-day study.

化学信息

分子量 593.68
分子式 C33H35N7O4
CAS No. 2620629-32-3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础