PD-1/PD-L1-IN-62

PD-1/PD-L1-IN-62 是一种 PD-L1 抑制剂和 mTOR 调节剂,其抑制 PD-L1 的 IC50 为 6.9 nM,可解除 PD-1/PD-L1 通路介导的免疫抑制,并通过抑制 mTOR 磷酸化及下调下游靶点 SREBP1 显著降低胆固醇和甘油三酯水平以减少脂质蓄积,同时促进 CD3+CD8+ T 细胞向肿瘤组织浸润,进而有效抑制肿瘤生长,可用于肝细胞癌的研究。
PD-1/PD-L1-IN-62
产品编号: MS-A39315 分子式: C33H44N4O4 分子量: 560.73
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PD-1/PD-L1-IN-62 是一种 PD-L1 抑制剂和 mTOR 调节剂,其抑制 PD-L1 的 IC50 为 6.9 nM,可解除 PD-1/PD-L1 通路介导的免疫抑制,并通过抑制 mTOR 磷酸化及下调下游靶点 SREBP1 显著降低胆固醇和甘油三酯水平以减少脂质蓄积,同时促进 CD3+CD8+ T 细胞向肿瘤组织浸润,进而有效抑制肿瘤生长,可用于肝细胞癌的研究。

生物实验数据

生物活性 PD-1/PD-L1-IN-62 is a PD-L1 inhibitor and mTOR modulator that inhibits PD-L1 with an IC50 of 6.9 nM, relieves PD-1/PD-L1 pathway-mediated immunosuppression, significantly reduces cholesterol and triglyceride levels to decrease lipid accumulation by inhibiting mTOR phosphorylation and downregulating the downstream target SREBP1, and promotes CD3+CD8+ T cell infiltration into tumor tissues, thereby effectively suppressing tumor growth, and can be used for research on hepatocellular carcinoma.
体外研究
(In Vitro)

PD-1/PD-L1-IN-62 (ZQ8) (0.25-1 μM; 48 h) 对单独培养的 HepG2 细胞仅表现出极低的细胞毒性。
PD-1/PD-L1-IN-62 (0.25-1 μM; 48 h) 可逆转 HepG2/Jurkat T 细胞共培养模型中 PD-1/PD-L1 介导的免疫抑制。
PD-1/PD-L1-IN-62 (0.05-0.4 μM; 48 h) 可剂量依赖性地减少 PA/OA 诱导的脂肪变性 HepG2 细胞中的脂质蓄积,在 0.4 μM 浓度下可使胆固醇降低 41%、甘油三酯降低 19%。
PD-1/PD-L1-IN-62 (0.05-0.4 μM; 48 h) 可在 PA/OA 诱导的脂肪变性 HepG2 细胞中呈剂量依赖性抑制 mTOR 磷酸化并下调 SREBP1 的表达。
PD-1/PD-L1-IN-62 在 Palmitic acid (MS-A29753)/Oleic acid (MS-M89265) 诱导的脂肪变性 HepG2 细胞中的降脂作用与 PD-L1-mTOR-SREBP1 信号轴的调控相关。

Cell Cytotoxicity Assay

Cell Line: HepG2/Jurkat T cell coculture
Concentration: 0.25-1 μM (coculture); 10 ng/mL IFN-γ (HepG2 pretreatment); PHA-P (MS-O03265) (Jurkat pretreatment)
Incubation Time: 48 h (coculture); 24 h (HepG2 pretreatment); 48 h (Jurkat pretreatment)
Result: Reduced HepG2 cell viability in a concentration-dependent manner in the coculture model.
At 1 μM, reduced HepG2 viability to 65.4%, showing significantly enhanced potency compared to NP19 (73.3% viability) and BMS-202 (78.9% viability).

Western Blot Analysis

Cell Line: PA/OA-induced steatotic HepG2 cells
Concentration: 0.05-0.4 μM (with PA/OA); 0.25 mM PA/0.5 mM OA
Incubation Time: 48 h
Result: Dose-dependently suppressed phosphorylation of mTOR, with a 40% reduction at 0.4 μM, while total mTOR levels remained unchanged.
Concomitantly, downregulated SREBP1 expression in a dose-dependent manner.
体内研究
(In Vivo)

PD-1/PD-L1-IN-62 (ZQ8) (10-20 mg/kg;腹腔注射;每日 1 次;连续 7 天) 可剂量依赖性地抑制荷 Hepa1-6 移植瘤的 C57BL/6 小鼠的肝细胞癌生长,同时还能增加肿瘤浸润细胞毒性 T 细胞数量并降低全身血脂水平。

Animal Model: C57BL/6 mice with Hepatocellular carcinoma
Dosage: 10 mg/kg; 20 mg/kg
Administration: intraperitoneal; once daily; 7 days
Result: Achieved 75.1% tumor volume reduction and 64.7% tumor weight reduction, with no significant body weight fluctuations or overt toxicities observed.
Achieved 86.2% tumor volume reduction and 73.4% tumor weight reduction, with no significant body weight fluctuations or overt toxicities observed.
Increased the proportion of CD3+CD8+ cytotoxic T cells in tumor tissues to 5.5%.
Reduced serum triglyceride levels to 65.5% of the control group levels.
Reduced serum total cholesterol levels to 78.4% of the control group levels.
Induced a mild, non-statistically significant reduction in lipid accumulation within tumor tissues via Oil Red O staining.

化学信息

分子量 560.73
分子式 C33H44N4O4

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础