Phosphodiesterase-IN-5

Phosphodiesterase-IN-5 是一种强效、口服有效的选择性磷酸二酯酶 10A (PDE10A) 抑制剂,IC50 值为 6.2 nM,对其他 PDE 亚型表现出 1612 倍以上的选择性,通过阻断 cAMP/PKA/CREB 信号通路抑制肌成纤维细胞分化,在 Bleomycin (BLM) (MS-R86735) 诱导的小鼠肺纤维化 (PF) 模型中表现出显著的抗纤维化作用,可用于肺纤维化的研究。
Phosphodiesterase-IN-5
产品编号: MS-A06579 分子式: C26H26FN7O 分子量: 471.53
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Phosphodiesterase-IN-5 是一种强效、口服有效的选择性磷酸二酯酶 10A (PDE10A) 抑制剂,IC50 值为 6.2 nM,对其他 PDE 亚型表现出 1612 倍以上的选择性,通过阻断 cAMP/PKA/CREB 信号通路抑制肌成纤维细胞分化,在 Bleomycin (BLM) (MS-R86735) 诱导的小鼠肺纤维化 (PF) 模型中表现出显著的抗纤维化作用,可用于肺纤维化的研究。

生物实验数据

生物活性 Phosphodiesterase-IN-5 is a potent, orally active and selective phosphodiesterase 10A (PDE10A) inhibitor with an IC50 value of 6.2 nM that exhibits over 1612-fold selectivity against other PDE subtypes, inhibits myofibroblast differentiation by blocking the cAMP/PKA/CREB signaling pathway, demonstrates significant antifibrotic effects in the Bleomycin (BLM) (MS-R86735)-induced mouse pulmonary fibrosis (PF) model, and can be used for the study of pulmonary fibrosis.
IC50 & Target

PDE10A

6.2 nM (IC50)

体外研究
(In Vitro)

Phosphodiesterase-IN-5 (compound QC-3) (5-20 μM;48 小时) 通过激活 cAMP/PKA/CREB ​​通路,在 TGF-β1 (MS-X60592) 刺激的 MRC-5 细胞中表现出抗纤维化活性,从而抑制肌成纤维细胞分化和 ECM 沉积。
Phosphodiesterase-IN-5 与 PDE10A 的催化结构域结合,与 Gln726 形成氢键,与 Ile692 形成疏水相互作用,而 6-F 取代基能够通过水分子与 Asp674 形成卤键。

Cell Viability AssayWestern Blot AnalysisCell Proliferation AssayApoptosis AnalysisCell Cytotoxicity AssayCell Cycle AnalysisRT-PCRCell Autophagy AssayImmunofluorescenceCell Differentiation AssayCell

Cell Line: MRC-5 cells
Concentration: 3.125, 6.25, 12.5, 25, 50, 100, 200 μM
Incubation Time: 48 h
Result: Showed no cytotoxic in MRC-5 cells at concentrations up to 200 μM.

Western Blot Analysis

Cell Line: TGF-β1-stimulated MRC-5 cells
Concentration: 5, 10, 20 μM
Incubation Time: 48 h
Result: Demonstrated concentration-dependent reductions in FN, COL-I, and α-SMA protein expression.
体内研究
(In Vivo)

Phosphodiesterase-IN-5 (10 mg/kg,灌胃,每日一次,持续 21 天) 通过 cAMP/PKA/CREB ​​信号通路阻断肌成纤维细胞分化,在 BLM 诱导的小鼠 PF 模型中表现出强大的抗纤维化功效。

Animal Model: Male C57BL/6 mice (7-9 weeks old, 20-24 g) induced by BLM
Dosage: 2.5, 5, 10 mg/kg
Administration: i.g.; daily for 21 days
Result: Dose-dependently reversed BLM-induced changes in Penh, endexpiratory pause (EEP), relaxation time (RT), andfrequency (f), nearly restoring them to normal levels.
Mitigated BLM-induced body weight loss and elevated lung coefficient in a dose-dependent manner.
Reduced IL-6 and TGF-β levels in broncho alveolar lavage fluid (BALF), and restored pulmonary cAMP levels.
Markedly reduced BLM-induced increases in IL-6 and TGF-β levels in BALF, with the mos pronounced inhibition observed at the 10 mg/kg dose.
Restored pulmonary cAMP levels.
Improved pulmonary morphology.
Effectively reduced the level of alveolar wall thickening, inflammatory cell infiltration, and collagen deposition.
Showed a dose-dependent reduction in fibrotic lesions.
Significantly suppressed the BLM- induced overexpression of fibrotic markers such as FN, COL-I, and α-SMA, with the most pronounced effect observed at a dose of 10 mg/kg.

化学信息

分子量 471.53
分子式 C26H26FN7O

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础