3-Chlorodiphenylamine

Synonyms: 3-氯二苯胺
3-Chlorodiphenylamine 是一种基于二苯胺结构的高亲和力心肌 Ca2+ 增敏剂 (Ca2+ sensitizer),可与心肌肌钙蛋白 C (cTnC) 的 N 端结构域结合 (Kd=6 μM),且因其分子体积小,可作为开发更强 Ca2+ 增敏化合物的极好起始支架,用于收缩性心力衰竭的研究。
产品编号: MS-A04402 纯度: 98.74% CAS No.: 101-17-7 分子式: C12H10ClN 分子量: 203.67
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价

产品描述

3-Chlorodiphenylamine 是一种基于二苯胺结构的高亲和力心肌 Ca2+ 增敏剂 (Ca2+ sensitizer),可与心肌肌钙蛋白 C (cTnC) 的 N 端结构域结合 (Kd=6 μM),且因其分子体积小,可作为开发更强 Ca2+ 增敏化合物的极好起始支架,用于收缩性心力衰竭的研究。

生物实验数据

生物活性 3-Chlorodiphenylamine is a high-affinity cardiac Ca2+ sensitizer based on a diphenylamine scaffold that binds to the N-terminal domain of cardiac troponin C (cTnC) with a Kd of 6 μM, and due to its small molecular size, it serves as an excellent starting scaffold for developing more potent Ca2+ sensitizing compounds for the study of systolic heart failure.
IC50 & Target cNTnC–cSp chimera:10 µM (Kd), N-domain of cardiac troponin C (cTnC):6 µM (Kd)
体外研究
(In Vitro)

3-Chlorodiphenylamine is able to bind highly (Kd=10 μM) to a chimeric protein consisting of the regulatory N-domain of cTnC (cNTnC) and the switch region of cTnI (cNTnC-cSp chimera).
3-Chlorodiphenylamine (100 μM) results in a 1.5-fold increase in the Ca2+ sensitivity of force development without altering the maximal or resting forces in skinned ventricular trabeculae.
3-Chlorodiphenylamine (25-100 μM) increases Ca2+ sensitivity of the N-domain of intact cTnC after reconstitution into the cTn complex (cTnC complexed with cTnI and cTnT) in a concentration-dependent manner. It exhibits pCa50s with 6.39±0.01, 6.65±0.01, and 6.73±0.02 in the presence of 25, 50, and 100 μM 3-Chlorodiphenylamine, respectively.

性状 液体(密度:1,21 g/cm3)
颜色 Colorless to light yellow

化学信息

分子量 203.67
分子式 C12H10ClN
CAS No. 101-17-7
别名 3-氯二苯胺

储存&溶解度

储存方式
Pure form -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (490.99 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM4.9099 mL24.5495 mL49.0990 mL122.7476 mL
5 mM0.9820 mL4.9099 mL9.8198 mL24.5495 mL
10 mM0.4910 mL2.4550 mL4.9099 mL12.2748 mL
15 mM0.3273 mL1.6366 mL3.2733 mL8.1832 mL
20 mM0.2455 mL1.2275 mL2.4550 mL6.1374 mL
25 mM0.1964 mL0.9820 mL1.9640 mL4.9099 mL
30 mM0.1637 mL0.8183 mL1.6366 mL4.0916 mL
40 mM0.1227 mL0.6137 mL1.2275 mL3.0687 mL
50 mM0.0982 mL0.4910 mL0.9820 mL2.4550 mL
60 mM0.0818 mL0.4092 mL0.8183 mL2.0458 mL
80 mM0.0614 mL0.3069 mL0.6137 mL1.5343 mL
100 mM0.0491 mL0.2455 mL0.4910 mL1.2275 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础